Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Gate motors

Gate motor repairs and installation across Johannesburg, the East Rand and Centurion

Sliding and swing gates: we find the fault, fix the motor, the battery, the rack or the remotes, and fit new motors when the old one is done. Tap a part on the drawing to see what usually goes wrong with it.

Experience

10 years of experience in gate motor installation and repairs

A sliding gate and its motor, with the motor, rack, safety beams, remote and battery called outOpening01Motor02Rack03Safety beams04Remote05Battery
  1. 01Motor
  2. 02Rack
  3. 03Safety beams
  4. 04Remote
  5. 05Battery

What we repair on a gate motor

A gate motor is a small system: the motor and gearbox, a control card that decides what to do, a battery that runs it, a charger that keeps the battery full, a receiver for the remotes, safety beams across the opening and, on a sliding gate, a steel rack along the gate that the motor's pinion drives. When the gate misbehaves, any one of them can be the cause, so the first job is finding out which.

The repairs we do most:

  • batteries that won't hold a charge, and chargers or power supplies that have stopped charging
  • control cards and receivers damaged by lightning, power surges or ants
  • racks that have worn, bent or come loose, and pinions with stripped teeth
  • gearboxes that grind, slip or jam
  • safety beams knocked out of line or failed, and the wiring between them
  • limit switches and magnets, so the gate stops where it should
  • remotes that need replacing or coding, and keypads
  • motors that need a manufacturer's service, which we take in and bring back

All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs.

Gloved hands fitting a steel gear rack along the bottom of a sliding gate, the motor's pinion gear beside it

The faults we see most

Most gate motor calls start with one of a handful of symptoms, and each has its own short list of causes:

  • The motor beeps. A low battery, no mains power, something between the beams or a lock-out. The number of beeps tells you which: see what a beeping gate motor is telling you.
  • The gate won't open or close at all. No power, a flat battery, a motor left in manual mode or a tripped safety setting. Start with our step-by-step checks.
  • The remote does nothing. Usually the remote's own battery, sometimes a remote that has lost its code, and when every remote stops at once, the receiver. See why a gate remote stops working.
  • It opens a little, stops and goes back. The motor has felt resistance and backed off for safety: a dragging wheel, a bent rail, a tired battery or the beams.
  • It opens or closes by itself. A stuck button on a remote or a keypad, a beam that blinks, or a receiver picking up a stray code. Here's why it happens.
  • The battery doesn't last. After months of load-shedding many batteries are simply worn out: see a battery that won't charge.

The fault finder below walks through each one: what's likely, the checks that are safe to do yourself and when to stop and book.

Sliding gates and swing gates

A sliding gate runs along a rail on wheels, and the motor sits on a concrete base beside it, driving a steel rack fixed along the bottom of the gate. It's the most common driveway gate in Johannesburg, and the faults are as much about the gate as the motor: wheels and guide rollers wear, rails lift and rust, and a gate that has started to drag makes any motor struggle. More on how they work and what goes wrong: sliding gate repairs.

A swing gate opens on hinges, one or two leaves, each pushed by its own arm fixed to the pillar. The arms suit driveways that slope or have no room to the side for a gate to slide into, and their weak points are the hinges, the brackets on the pillars and the arms themselves. See swing gate motors.

Which motor suits a gate comes down mostly to its weight and how often it opens. For sliding gates up to 500 kg we fit the Centurion D5-Evo, the ET Drive 500 or a Gemini slider; heavier gates need a motor built for 1,000 kg, such as the Centurion D10 or the ET Drive 1000.

A technician adjusting the bracket of a gate arm on a brick pillar beside a double swing gate

New gate motors, supplied and installed

When a motor is beyond repair, or a gate has never been automated, we supply and install the whole kit: the motor on its base plate, the rack along the gate, the battery, the remotes coded to the receiver, the limits set and the safety settings checked. A new installation is also the right time to add safety beams across the opening and an anti-theft bracket over the motor. The detail is on gate motor installation.

Here are our three sliding gate kits, with the installation included. Swing gate kits, the ET Wingo single swing kit and the Centurion Vantage 500 double swing kit among them, are on gate motor prices, side by side. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

  • Sliding gate kit

    Centurion D5-Evo SMART sliding gate kit

    R7 999incl. installation

    In the kit

    • D5-Evo SMART motor (gates up to 500 kg)
    • 12 V 7 Ah battery
    • 2 × 4-button NOVA remotes
    • 4 m steel rack
    Our promise

    1-year guarantee on every motor kit we supply and install

  • Sliding gate kit

    ET Drive 500 sliding gate kit

    R6 999incl. installation

    In the kit

    • Drive 500 (gates up to 500 kg)
    • 12 V 7 Ah battery
    • 4 m steel rack
    • 2 × 4-button ET remotes
    Our promise

    1-year guarantee on every motor kit we supply and install

  • Sliding gate kit

    Gemini 12 V DC slider kit

    R6 999incl. installation

    In the kit

    • Gemini DC slider (gates up to 500 kg)
    • 2 × 3-button Gemini remotes
    • 12 V 7 Ah battery
    • 4 m steel rack
    Our promise

    1-year guarantee on every motor kit we supply and install

Prices checked October 2026. Price includes the kit listed, standard installation on a gate or door that already runs freely, and our 1-year kit guarantee. Not included: a power point at the motor if there isn't one (a job for a registered electrician), extra rack, gate or door repairs, and accessories. These are quoted before any work starts.

Compare two kits

SpecCenturion D5-Evo SMART sliding gate kitET Drive 500 sliding gate kit
Price, installedR7 999R6 999
ForSliding gateSliding gate
In the boxD5-Evo SMART motor (gates up to 500 kg)Drive 500 (gates up to 500 kg)
In the box12 V 7 Ah battery12 V 7 Ah battery
In the box2 × 4-button NOVA remotes4 m steel rack
In the box4 m steel rack2 × 4-button ET remotes
Guarantee1-year guarantee on every motor kit we supply and install1-year guarantee on every motor kit we supply and install

Brands we work on

Most driveway gates around Johannesburg run on one of three makes, and we work on all of their current motors and most of the older ones:

We also repair Digidoor, DTS and Nice/Hansa motors. If yours is something else, send us a photo of the motor and its label when you book and we'll tell you straight away whether we can help.

Batteries, load-shedding and remotes

The battery is the part that wears out first. Most sliding gate motors carry a 12 V 7 Ah battery, and in a power cut it runs the gate on its own: ET rates its Drive 500 at about 100 openings in 24 hours on a healthy, charged battery, while a tired one gives up after a few. Long stretches of load-shedding, with too little time to recharge in between, wear batteries out faster. We test batteries and chargers and replace gate motor batteries with the right one for the motor. How long a gate motor battery lasts explains what to expect.

If the power is off and the battery is flat, the gate can still be moved by hand once the motor is released: here's how to open a gate manually. And if the gate has acted up since the power came back, start with gate motor faults after load-shedding.

Remotes are the other everyday job. We supply and code gate remotes for Centurion, ET and Gemini receivers, and delete lost ones from the memory so they can't open the gate.

A technician lifting a small sealed battery out of an open sliding gate motor at dusk

What happens when we come out

You book online, on WhatsApp or by phone, and we confirm a time. The technician checks the whole system, not just the part you noticed: power, battery and charger, the control card's fault indications, the rack and pinion, the beams, the limits and how freely the gate runs with the motor released. Then you get the price before any work starts.

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies. For comparison, call-out fees in the wider market typically run R500–R950 (Kandua's 2026 cost guides).

Same-day repairs are part of the normal week, and for a gate stuck open at night there are 24/7 emergency repairs across Gauteng: see emergency repairs.

What a gate motor repair typically costs

What it typically costs in Johannesburg, from published 2026 cost guides. Prices checked October 2026.

  • the average repair: R750–R3 200 (Kandua)
  • easy jobs such as a battery, a remote or realigned beams, with the call-out and parts: R500–R1 200 (Kandua)
  • complex jobs such as a control card, a power supply or a gearbox: R1 500–R4 500 (Kandua)

These are market prices, not ours. Every job, part and price is broken down on gate motor repair costs, with where the figures come from. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Repair it or replace it?

Most gate motors are worth repairing: a battery, a remote, a set of beams or even a control card costs far less than a new motor. Replacement starts to make sense when the motor is old and the expensive parts fail together, when parts for an older model are hard to find, or when the gate has outgrown the motor (a heavier gate, or a home that became a complex).

A technician can tell you which side of that line your motor is on once it has been checked. Repair or replace a gate motor sets out the trade-off, and which gate motor to choose helps if it's time for a new one.

Fault finder

What is your gate doing?

Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.

What's it doing?

Likely causes

Gate motor · it's beeping

Most likely first

  1. The mains power to the motor is off, so it's running on its battery. Centurion and Gemini motors give two beeps (or two flashes) in a row; an ET Drive flashes twice and gives a one-second beep every 15 seconds.

  2. The battery is low. Centurion and Gemini motors give three beeps in a row; an ET Drive's status light flashes four times, without a beep.

  3. Something is between the safety beams. A Centurion motor gives a single beep every so often and won't close.

  4. The gate has hit something several times in a row, so the motor has stopped to protect itself. A Centurion keeps beeping until that's cleared.

  5. A holiday lockout or a time setting is blocking the remote: the motor beeps once when you press it and the gate doesn't move.

  6. On a Gemini, four beeps as the motor starts means the manual release lever isn't fully engaged.

Safe checks you can do

When to stop and book

If it keeps beeping with the power on and the beams clear, the battery, charger or controller needs a technician. Don't open the motor: Centurion warns that work by anyone unauthorised may void the manufacturer's warranty.

Questions

Gate motor questions

What are the common problems with gate motors?

The most common are a flat or worn-out battery, a charger or power supply that has stopped charging, remotes that have lost their code, safety beams out of line, a worn rack or stripped pinion, and control cards damaged by lightning, surges or ants. Most announce themselves with beeps or a status light pattern. Find the likely fault.

How to get gate motor working again?

Work through the safe checks in order: make sure the motor has mains power, look at the status light for a battery or mains warning, check the motor isn't left in manual mode, clear anything between the beams, and try a second remote. If the gate still won't move, release it and close it by hand, lock it, and book a technician. Go through the checks step by step.

How to repair a gate motor?

Repairs beyond the battery, the remote and the beams mean opening the motor, testing the control card and charger, and working on the gearbox or the rack, which is a technician's job. What you can safely do is find the fault: count the beeps, check the power and the remote, and look at the gate itself. See what we repair on a gate motor.

Where can I find gate motor repairs in Johannesburg South?

We cover Johannesburg South as part of our Johannesburg area, from the southern suburbs out towards Alberton, which we also serve. Book with your address and the technician comes to you. See gate motor repairs in Johannesburg South.

How much does it cost to repair an electric gate?

In Johannesburg the average gate motor repair typically costs R750–R3 200 (Kandua), with simple jobs such as a battery or a remote at the low end and a control card or gearbox at the top (prices checked October 2026). Damage to the gate itself, its wheels or its rail is priced on top. See what each repair typically costs.

How much does a new gate motor cost?

Our installed sliding gate kits are R6 999 for the ET Drive 500 sliding gate kit, R6 999 for the Gemini 12 V DC slider kit and R7 999 for the Centurion D5-Evo SMART sliding gate kit, each with the battery, rack, remotes and installation. A heavier gate or a double swing gate costs more. Compare every kit.

What is the life expectancy of an electric gate motor?

There's no fixed number: a motor's life depends on how often the gate opens, how freely the gate runs and how well it's looked after. A gate that drags, or a motor working harder than its rating, wears out much sooner, and the battery wears out long before the motor. Nice ties its two-year manufacturer's warranty on the ET Drive range to a service every 12 months, which says how much servicing matters. Weigh up repair or replacement.

What causes a gate motor to stop working?

The usual causes are a flat battery after a power cut, a charger or power supply failure, a tripped isolator, a lightning or surge strike on the control card, ants inside the motor, a motor left in manual mode, and a gate that has started dragging so the motor trips its safety. Check what your status light is saying.

What are some common problems with electric gates?

Apart from the motor, the gate itself causes plenty of trouble: worn wheels and guide rollers, a rail that has lifted or rusted, a bent frame, a gate that has dropped on its hinges, and missing end stoppers. Any of these makes the motor work harder and trip its safety, which is why a technician checks the gate as well as the motor. Read about sliding gate repairs.

How much does a motor for a gate cost?

The motor alone sells for about R4 400 (Centurion D3 SMART+), R6 000 (D5-Evo SMART+), R5 000 (ET Drive 500) in South African shops, before a battery, rack, remotes or fitting (prices checked October 2026). Fitting labour for a sliding gate motor typically adds R1 500–R3 000 (Kandua). See our kits with the installation included.

Book a technician

Get a gate motor quote

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.