Gate motors · Melrose Arch
Gate motor repairs in Melrose Arch, and the loops that sense cars
A parking gate that won't open for cars leaving, a gate that tries to close on a car still in the way, a loop that stopped working after the driveway was resurfaced: we repair and install gate motors and their loops across Melrose Arch.
Six-month guarantee on our repairs
1-year guarantee on every motor kit we supply and install
Melrose Arch and the areas around it. Every area we cover
A wire in the road that sees cars
At a building's parking entrance, and at many larger homes, the gate doesn't wait for a remote. A loop of wire set into the driveway senses the metal of a car above it, and a small detector tells the gate motor. Centurion's FLUX SA is one such detector, and its manual lists the jobs a loop can do:
- Free exit: a car driving up to the gate from inside opens it, with no remote or button.
- Safety: while a car is over the loop in the gate's path, the gate or boom won't close on it.
- Closing: once the car has passed over, the gate or barrier closes behind it.
- Arming: a loop that readies access control equipment, such as a keypad or card reader, only when a vehicle is there.
Loops like these are common at parking entrances, and we fit and repair them at homes around Melrose Arch too, in Melrose Estate, Melrose North and Birdhaven.

What the detector can be set to do
From Centurion's manual, the FLUX SA's settings shape how it behaves:
- Four sensitivity levels, and an automatic boost that raises it once a vehicle is detected, so a car towing a trailer isn't lost halfway over.
- A filter that adds a two-second delay before it reacts, useful where something passes quickly over a loop and shouldn't trigger the gate.
- A presence setting that holds the output for as long as a vehicle sits on the loop. Centurion warns that with it on, a change such as metal placed near the loop isn't tuned out automatically.
- A run switch. Turned off, it holds the output in the detected state, so a barrier can't come down on someone working on it.
Its lights help with fault-finding: one for power, one that lights when a vehicle is detected, five that show the strength of the detection, and a fault light that flashes continuously if the loop is broken.
How a loop lasts
Most loop faults come back to how the loop was laid. Centurion's manual sets out what makes one reliable:
| Loop perimeter | Turns |
|---|---|
| 3 to 4 m | 6 |
| 4 to 6 m | 5 |
| 6 to 10 m | 4 |
| 10 to 20 m | 3 |
| Over 20 m | 2 |
- The right wire: stranded copper of at least 1.5 mm², with cross-linked polyethylene (XLPE) insulation.
- A square or rectangular loop, at least 1 m between opposite sides.
- A preformed loop in conduit is the most reliable, because it keeps water out and resists vibration.
- Where the loop is cut into the road, the slot is about 4 mm wide and 30 to 50 mm deep, with the corners cut at 45° so the wire isn't kinked, and sealed with epoxy or bitumen.
- The feeder to the detector twisted at least 20 times a metre, and screened where there's electrical noise.
- No joints, or, where one can't be avoided, soldered and made waterproof.
- The detector in a weatherproof spot close to the loop, such as inside the gate motor, but away from the motor's DOSS sensor.
Two loops near each other, at an entrance and an exit, can interfere. Centurion's answer is to keep them at least 2 m apart, on different frequency settings and with different numbers of turns.
When a loop stops working
- The fault light flashes: the loop is broken, often where the road surface has cracked or been dug up, or at a joint that has let water in.
- The gate opens by itself now and then: the loop may be picking up interference from a neighbouring loop, or set too sensitive.
- A car isn't detected: sensitivity too low, a loop too small for the vehicles using it, or a detector that needs re-tuning, which the reset button does.
After a driveway is resurfaced or paved, a slot-cut loop is often damaged or buried too deep, and has to be cut in again.
Gate motor repairs in Melrose Arch
We repair Centurion, ET and Gemini motors, the loops and detectors that serve them, beams, batteries, control cards and remotes, and the gates themselves, at homes and at building entrances. All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. The fault finder below has the safe checks to try first.
New gate motors in Melrose Arch
Our kits are installed at a set price with battery back-up and remotes, for sliding gates up to 500 kg: the Centurion D5-Evo SMART sliding gate kit at R7 999, the ET Drive 500 sliding gate kit at R6 999 or the Gemini 12 V DC slider kit at R6 999. Loops, detectors and parking-entrance gates are quoted on site. Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Sliding gate kit
Centurion D5-Evo SMART sliding gate kit
R7 999incl. installation
In the kit
- D5-Evo SMART motor (gates up to 500 kg)
- 12 V 7 Ah battery
- 2 × 4-button NOVA remotes
- 4 m steel rack
Our promise1-year guarantee on every motor kit we supply and install
Sliding gate kit
ET Drive 500 sliding gate kit
R6 999incl. installation
In the kit
- Drive 500 (gates up to 500 kg)
- 12 V 7 Ah battery
- 4 m steel rack
- 2 × 4-button ET remotes
Our promise1-year guarantee on every motor kit we supply and install
Sliding gate kit
Gemini 12 V DC slider kit
R6 999incl. installation
In the kit
- Gemini DC slider (gates up to 500 kg)
- 2 × 3-button Gemini remotes
- 12 V 7 Ah battery
- 4 m steel rack
Our promise1-year guarantee on every motor kit we supply and install
Prices checked October 2026. Price includes the kit listed, standard installation on a gate or door that already runs freely, and our 1-year kit guarantee. Not included: a power point at the motor if there isn't one (a job for a registered electrician), extra rack, gate or door repairs, and accessories. These are quoted before any work starts.
Compare two kits
| Spec | Centurion D5-Evo SMART sliding gate kit | ET Drive 500 sliding gate kit |
|---|---|---|
| Price, installed | R7 999 | R6 999 |
| For | Sliding gate | Sliding gate |
| In the box | D5-Evo SMART motor (gates up to 500 kg) | Drive 500 (gates up to 500 kg) |
| In the box | 12 V 7 Ah battery | 12 V 7 Ah battery |
| In the box | 2 × 4-button NOVA remotes | 4 m steel rack |
| In the box | 4 m steel rack | 2 × 4-button ET remotes |
| Guarantee | 1-year guarantee on every motor kit we supply and install | 1-year guarantee on every motor kit we supply and install |
Booking a gate technician in Melrose Arch
On the job card, give the motor's make, whether there's a loop in the driveway, and what the gate is doing; for a building, add who manages the entrance and when we can work. The precinct had 1,103 residents on 0.74 square kilometres at the 2011 census, and we cover it and the streets around it. Same-day repairs are offered when the day allows, and a parking gate stuck open is treated as urgent.
Fault finder
What is your gate doing?
Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.
What's it doing?
Likely causes
Gate motor · it's beeping
Most likely first
The mains power to the motor is off, so it's running on its battery. Centurion and Gemini motors give two beeps (or two flashes) in a row; an ET Drive flashes twice and gives a one-second beep every 15 seconds.
The battery is low. Centurion and Gemini motors give three beeps in a row; an ET Drive's status light flashes four times, without a beep.
Something is between the safety beams. A Centurion motor gives a single beep every so often and won't close.
The gate has hit something several times in a row, so the motor has stopped to protect itself. A Centurion keeps beeping until that's cleared.
A holiday lockout or a time setting is blocking the remote: the motor beeps once when you press it and the gate doesn't move.
On a Gemini, four beeps as the motor starts means the manual release lever isn't fully engaged.
Safe checks you can do
When to stop and book
If it keeps beeping with the power on and the beams clear, the battery, charger or controller needs a technician. Don't open the motor: Centurion warns that work by anyone unauthorised may void the manufacturer's warranty.
From the official manuals: Centurion D5-Evo and D10 user guide, ET Drive 500 and 600 user manual, Gemini 24V DC slider manual.
Questions
Gate motor questions in Melrose Arch
What is a free-exit loop on a gate?
A loop of wire in the driveway that senses a car approaching from inside and opens the gate, with no remote needed. Read about loops.
Why does my gate open by itself?
If there's a loop in the driveway, it may be too sensitive or picking up a neighbouring loop; Centurion recommends 2 m between loops and different frequencies. Read about loop faults.
Why did my gate loop stop working after paving?
A loop cut into the road is often broken or buried too deep when the surface is redone, and has to be laid again. Read about loop faults.
How many turns of wire does a gate loop need?
It depends on its size: six turns for a 3 to 4 m perimeter, falling to two for one over 20 m, in Centurion's table. See the table.
Book a technician
Get a gate motor quote in Melrose Arch
Job card
We WhatsApp or call you back. Fields marked (required) are needed.