Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Intercoms

Intercom repairs and installation

A gate station that won't ring, a handset with no sound, a call that comes through but won't open the gate: we find where the system has broken, from the gate to the kitchen wall, and fix it or replace it, across Johannesburg, the East Rand and Centurion.

Our promise

Six-month guarantee on our repairs

A technician wiring the back of a gate intercom keypad on a steel pedestal at a driveway

What we repair on an intercom

An intercom has more parts than it looks: the gate station at the road, one or more handsets or screens indoors, a power supply, the cable or radio link between them, and a connection to the gate motor so a button inside opens the gate. A fault in any one of them can look the same from the kitchen, which is why we test the whole chain before replacing anything.

The repairs we do most:

  • gate stations with dead buttons, failed speakers or microphones, or water inside
  • handsets and video screens that are silent, crackle or have stopped lighting up
  • the gate-release connection, when the call works but the gate doesn't open
  • cables cut by digging, chewed, or burnt out by lightning, and connections corroded at the pillar
  • power supplies and transformers that have failed
  • wireless systems whose handset and gate station have lost their pairing
  • GSM intercoms with a SIM, airtime or signal problem

All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs.

A woman answering a white wall-mounted intercom handset in her kitchen

How a gate intercom works

A visitor presses the button on the gate station. The station rings the handsets inside over a cable, or over radio on a wireless system, and you talk through it like a phone. On a video system a camera in the gate station puts the visitor on a screen. When you press the gate button on the handset, it sends a signal to the gate motor's trigger input, exactly as a remote would, and the gate opens.

A GSM intercom takes the handset out of the house altogether. It has a SIM card, and when the button at the gate is pressed it phones your cellphone, so you can answer and open the gate from anywhere with signal. Centurion's G-SPEAK ULTRA, one we work on, is set up and managed online through Centurion's G-WEB service.

Knowing which kind you have matters for the repair: a wired system usually fails at a cable or a connection, a wireless one at its pairing or batteries, and a GSM one at its SIM or signal.

The faults we see most

  • Nothing happens when a visitor presses the button. Power first: a tripped plug point, a failed power supply, or a cable fault between the gate and the house. See what to check when an intercom stops working.
  • It rings, but the gate won't open. The talking side works, so the problem is the gate-release connection or the gate motor itself. Our guide walks through it.
  • The handset rings but there's no sound, or only one side can hear. A failed speaker or microphone, a loose connection, or a handset at the end of its life. Here's how to narrow it down.
  • A hum, buzz or crackle on the line. Often water in the gate station, a damaged cable, or the intercom cable running alongside mains wiring.
  • The video screen is black but the audio works. The camera in the gate station, or the video pair in the cable.
  • A wireless handset is dead or frozen. Usually its battery; the manuals say to take the battery out and put it back to reset it.

The fault finder below goes through the checks that are safe to do yourself.

Audio, video, wireless or GSM

If you're replacing an old system or installing one for the first time, these are the four kinds, and each suits a different property:

  • Wired audio: a gate station and a handset joined by a cable. Simple, dependable and the least expensive, if there's already a cable from the gate to the house.
  • Wired video: the same with a camera and a screen, so you see who's at the gate before you open it; video intercoms covers them in full. Brands we fit and repair include Commax, Kocom and BPT.
  • Wireless: the gate station and handset talk over radio, so no cable needs to be laid up the driveway. Zartek makes several we work on. Range depends on the distance and the walls in between.
  • GSM: the intercom calls your phone, which suits a long driveway, a smallholding, a business where the person answering isn't always on site, or a complex where each unit is called on its own number. Centurion's G-SPEAK ULTRA is one.

We'll recommend one once we've seen the distance from the gate to where you'll answer, what cabling is already in place and how you'd like to answer: at a handset, on a screen or on your phone.

A woman in a hallway looking at a wall-mounted video intercom screen showing the gate

Intercom installation

An installation starts at the gate: the gate station goes on the pillar or on a pedestal at driver's-window height, with the cable or radio link run back to the house and the gate-release connection wired into the motor. Inside, the handset or screen goes where you'll actually answer it, and the power supply goes near a plug point. We test the call, the audio both ways, the video if there is one and the gate release before we leave.

Replacing an old system is often simpler than a new one, because the cable from the gate is usually already there and can be reused if it's in good condition. When it isn't, a wireless or GSM intercom avoids digging up the driveway.

If you're also having a gate motor installed or replaced, adding an intercom at the same time costs less, because the gate-release connection and the cabling to the pillar go in together: see gate motor installation.

Complexes, estates and businesses

A townhouse complex or an office park needs a multi-unit intercom: one gate station with a button or a keypad code for each unit, calling that unit's handset or phone. GSM systems are common here because they need no cable to each unit, and residents can open the gate for visitors and deliveries from wherever they are. On a busy entrance, pairing the intercom with a keypad gives residents and staff a code instead of a remote.

For a body corporate or a managing agent, we look at the whole entrance at once: the intercom, the gate motor and the safety beams, so a fault in one isn't blamed on another.

A hand entering a code on a steel keypad pedestal beside a driveway gate

What intercoms typically cost

What it typically costs in Johannesburg, from published cost guides and installer price lists. Prices checked October 2026.

  • a basic audio intercom, installed: R2 500–R5 000 (Kandua)
  • a video intercom, installed: R5 000–R15 000+ (Kandua)
  • an intercom added while a gate motor is being installed: R2 000–R5 000 (published price lists of Gauteng installers)
  • a GSM gate module, installed: R1 500–R3 000 (published price lists of Gauteng installers)

For comparison, intercom kits alone sell in South African shops for about R680 for a Commax 1-to-1 audio kit and about R3 700 for a Commax CDV-43K video kit (Takealot). Repairs have no published going rate: a reconnected cable and a replacement gate station are very different jobs, so we price a repair once we've found the fault. These are market prices, not ours. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Booking an intercom repair

Tell us the make if you know it (it's usually on the gate station or the handset), what happens when a visitor presses the button, and whether the gate motor works with its remote. A photo of the gate station and the handset helps. That's often enough for the technician to bring the right parts.

Same-day repairs are part of the normal week. If the intercom is down and the gate motor works, you can still let people in with a remote; if both are down, the gate can be opened by hand once the motor is released: here's how to open a gate manually.

Fault finder

What is your intercom doing?

Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.

What's it doing?

Likely causes

Intercom · the handset can't reach the gate unit

Most likely first

  1. No power to the gate (caller) unit.

  2. The handset's battery has run down.

  3. Too far apart, or a lot of steel in between.

  4. The handset and gate unit have lost their pairing.

Safe checks you can do

When to stop and book

Re-pairing a system or moving a unit for better range is a quick job on the visit.

Questions

Intercom questions

Who can fix an intercom?

An intercom technician who works on your make: we repair Centurion, BPT, Commax, Zartek and Kocom intercoms, wired, wireless and GSM. Because an intercom is wired into the gate motor, it helps when the same technician can check the motor too, which we do. Book an intercom repair.

How much does it cost to fix an intercom?

It depends entirely on what has failed: reconnecting a cable is a small job, while a new gate station or video screen costs about as much as a new kit, which sells in shops for about R680 for a Commax audio kit and about R3 700 for a Commax video kit (prices checked October 2026). There's no published going rate for repairs, so we price yours once we've found the fault. See what intercoms typically cost.

How much is intercom installation?

In Johannesburg a basic audio intercom typically costs R2 500–R5 000 (Kandua) installed, and a video intercom R5 000–R15 000+ (Kandua), depending on the system and how much cable has to be laid (prices checked October 2026). Adding one while a gate motor is installed is usually cheaper. Read about intercom installation.

How to reset intercom system?

It depends on the make. On a Zartek wireless intercom, a handset that behaves strangely is reset by taking its battery out and putting it back, and a frozen unit by removing all its power and reconnecting it. A Centurion G-SPEAK ULTRA has a Device Reset menu: Re-sync refreshes its link to G-WEB without losing settings, while Factory Reset erases everything. A wired audio system usually has no reset; if it's dead, look for a power or cable fault. See the faults we see most.

How do intercom systems work?

Pressing the button at the gate rings a handset or screen inside, over a cable or by radio, and you talk to the visitor; pressing the gate button on the handset triggers the gate motor the same way a remote does. A GSM intercom skips the handset and phones your cellphone instead. Read how a gate intercom works.

How to install an intercom system?

Mount the gate station at driver's-window height on the pillar or a pedestal, run the cable or set up the radio link to the house, wire the gate release into the gate motor's trigger input, then fit the handset and power supply indoors and test everything. The gate motor wiring is where most DIY installations go wrong, so it's worth having it done by a technician. See how we install intercoms.

How much to replace an intercom system?

Replacing an audio intercom typically costs R2 500–R5 000 (Kandua) installed and a video one R5 000–R15 000+ (Kandua) in Johannesburg (prices checked October 2026). If the existing cable from the gate is sound, reusing it keeps the cost down. Compare the four kinds of intercom.

What can I replace an old intercom system with?

Most people replace an old audio intercom with a video one on the same cable, a wireless intercom if the old cable has failed and they'd rather not dig, or a GSM intercom that calls their phone. The right choice depends on the distance to the gate and how you want to answer. Compare audio, video, wireless and GSM.

Is my intercom malfunctioning?

It is if the handset no longer rings, only one side can hear, there's a constant hum or crackle, the screen stays dark, or the call works but the gate doesn't open. Check the power at the plug first and try the gate with a remote: if the remote works and the intercom doesn't, the fault is in the intercom. Work through the intercom checks.

Book a technician

Get an intercom quote

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.