Intercoms · Hyde Park
Intercom repairs in Hyde Park, and opening the gate from anywhere
A video intercom at the gate whose screen has gone dark, a visitor waiting while you're at the office, a gate you can't remember closing: we repair and install intercoms and phone control across Hyde Park.
Six-month guarantee on our repairs
Hyde Park and the areas around it. Every area we cover
Home, and away
An intercom at the gate, often with a camera so you can see who's there, does its job when someone's at home to answer it. It doesn't help when the house is empty and a family member, a guest or a delivery is waiting outside. That's where control from a phone comes in, and Centurion's G-ULTRA is one way to add it to a gate that already has a motor.
The G-ULTRA doesn't speak to visitors; it lets you open the gate and see its state from your phone. For a visitor to call you wherever you are, a GSM intercom at the gate does that job. Many homes are best served by a gate intercom and a G-ULTRA together.

Centurion's G-ULTRA and the G-REMOTE app
From Centurion's installation manual: the G-ULTRA is a monitoring and control unit with a built-in cellphone modem, set up through G-WEB, Centurion's online system, and worked day to day with the G-REMOTE app. Whoever sets it up adds the family's phone numbers as users and chooses what each may do; they install G-REMOTE, and the gate opens with a tap on a large button.
- Your phone can be on any network. The unit itself comes with an MTN SIM, topped up with tokens bought on G-WEB. Another South African network's SIM works too, but its airtime is then managed outside G-WEB.
- Four channels and two relays, each set as an input or an output on G-WEB, can open the gate, the pedestrian gate or a door, or send a notification when something happens.
- Schedules can open an output at set times.
Is the gate closed?
Wired to a Centurion D-Series motor, the G-ULTRA's fourth input can follow the gate's state from the motor's controller, so the app shows whether it's closed, opening or open. Only that input can do it, so each G-ULTRA watches one gate; two gates need two units.
The unit's own screen shows the same gate status, along with its signal strength, whether it's connected to the internet and to G-WEB, the airtime left and its incoming and outgoing calls and SMSs, which makes faults quick to narrow down.

Fitting it properly
Centurion's manual sets out what a sound installation needs:
- A coverage check first, at the spot where the unit will go, with an external antenna if the signal is poor.
- Away from the motor's DOSS sensor and the remote receiver, inside the motor's housing or out of it, so it doesn't interfere with either.
- 11 to 24 V DC only. It takes its supply from the motor's controller or its own power supply, and mains must never reach it.
- Battery back-up. It draws about 300 mA at 12 V, so a 12 V 7 Ah battery could keep it going for roughly 23 hours in a power cut, in theory; an ageing battery gives less.
The SIM should last indefinitely, unless dust, corrosion or electrical interference get to it. If the unit loses its connection and the SIM is suspected, it can be cleaned or replaced, a job we do with the power off.
Intercom repairs in Hyde Park
We repair gate stations, handsets and video screens, GSM intercoms and G-series units, power supplies and the links to the gate motor, on Centurion, Zartek, Commax, Kocom and BPT systems. All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. The fault finder below starts with the safe checks.
Booking an intercom technician in Hyde Park
On the job card, tell us what's at the gate (an intercom, a video intercom, a GSM unit or a mix), the gate motor's make, and what isn't working. We work throughout Hyde Park, a small suburb of 2,431 residents at the 2001 census, from the streets by Hyde Park Corner to its edges with Illovo and Sandhurst. Same-day repairs are offered when the day allows, and a gate nobody can open from the house is treated as urgent.
Fault finder
What is your intercom doing?
Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.
What's it doing?
Likely causes
Intercom · the handset can't reach the gate unit
Most likely first
No power to the gate (caller) unit.
The handset's battery has run down.
Too far apart, or a lot of steel in between.
The handset and gate unit have lost their pairing.
Safe checks you can do
When to stop and book
Re-pairing a system or moving a unit for better range is a quick job on the visit.
From the official manuals: Zartek ZA654 manual, Zartek ZA660A manual.
Questions
Intercom questions in Hyde Park
Can I open my gate with an app on my phone?
Yes, with a unit such as Centurion's G-ULTRA at the gate: it's set up on G-WEB, and family members open the gate from the G-REMOTE app. Read about the G-ULTRA.
Can my phone show whether the gate is closed?
With a G-ULTRA wired to a Centurion D-Series motor, yes: its fourth input follows the gate's state, and the app shows closed, opening or open. Read about gate status.
Does a G-ULTRA only work on MTN?
It comes with an MTN SIM topped up through G-WEB, but takes any South African network's SIM; its airtime is then managed outside G-WEB. Your own phone can be on any network. Read more.
How long does a G-ULTRA run in a power cut?
It draws about 300 mA at 12 V, so a 12 V 7 Ah battery could run it for roughly 23 hours in theory, less as the battery ages. Read about fitting it.
Book a technician
Get an intercom quote in Hyde Park
Job card
We WhatsApp or call you back. Fields marked (required) are needed.