Intercoms · Bedfordview
Intercom repairs in Bedfordview: houses, clusters and offices
A cluster gate in Dowerglen where visitors can't find the unit number, a handset in Bedford Park that cuts visitors off mid-sentence, an office reception off Van Buuren Road that wants a door code for its staff: we repair and install intercoms across Bedfordview.
Six-month guarantee on our repairs
Bedfordview and the areas around it. Every area we cover
One gate, many units
In a cluster, a complex or an office building, one gate station calls many homes or offices, and each has its own handsets. Zartek's CDP-808 is a wireless system built for that, and its manual sets out how a call runs:
- The visitor keys in the unit's three-digit code and presses #. Unit 1 is still 001.
- The gate station calls that unit's handsets only, counting down from 20 seconds. If nobody answers, it shows NO REPLY and the visitor can try again.
- The resident answers by pressing the handset's push-to-talk button.
- The two take turns. The gate station's microphone stays live, so the visitor can speak from about a metre away without getting out of the car, following the prompts on its screen to listen or to speak.
- The resident opens the gate with the handset's Lock A button, or a second gate or door with Lock B, and the screen tells the visitor which one opened.
- The resident hangs up. If they forget, the gate station hangs up by itself 60 seconds after it last heard from the handset.

Features that often go unused
A CDP-808 does more than most residents know. From Zartek's manual:
- A name search. A visitor who doesn't know the unit number presses the star key twice and then #, scrolls through the residents' names in alphabetical order, and calls from there.
- A door entry code. Residents can open the gate from the gate station with * and a four-digit code of their own.
- A screen that wakes up. A motion sensor lights the screen and keypad when someone comes within 1 to 3 m, or walks past within 2 to 5 m, and switches them off 15 seconds after the movement stops.
- Handsets that talk to each other, within one unit, because they share its code.
- Calling the gate. A handset can call the gate station even when nobody has rung, which is how a resident reaches a guard on duty there.
- A back gate station, for an exit or a second entrance, with the same names and codes. Wired to the front one, it can tell a visitor the system is busy with another call.
Names, codes and handsets are changed by programming the gate station, which we do for the body corporate or the building manager.
Why calls cut out or words go missing
Some complaints about a wireless complex intercom come down to how it's used rather than a fault, because the speech goes one way at a time, like a two-way radio:
- The visitor's first words are lost. Zartek's manual says the visitor should speak only after the two beeps and the prompt on the screen.
- The resident's first words are lost. The push-to-talk button has to be pressed fully in before speaking, and held while talking.
- Both talk at once. Only one side is heard at a time; the other waits.
- The call ends on its own. Unanswered, it stops after 20 seconds; once connected, it hangs up 60 seconds after the gate station last heard from the handset.
- The handset is flat. It charges in about 4 hours and lasts about 5 hours of normal use off the charger, and it can live in the charger without harm.
If none of these explains it, the fault is in the equipment, and that's for us.

Offices and business premises
Bedfordview's offices and head offices often need two kinds of entry: vehicles at the gate, and people at reception. A system with two outputs can open the gate on one and release a door's strike lock on the other, staff can use door entry codes instead of carrying remotes, and the reception handset can call the gate station to speak to a guard there. Where a business would rather answer the gate on cellphones, a GSM intercom does that instead. We'll recommend one or the other once we've seen how the building is used.
Houses: wired, wireless or video
On a house, the choice is simpler. A wired intercom suits a gate close to the house with a clear route for the cable; a wireless one suits a long driveway or a path where a cable would be hard to lay; and a video intercom lets you see who's there before you answer. We repair all three, and when an old system can't be saved, we'll price the replacement that suits the property.
Intercom repairs in Bedfordview
We repair Zartek, Centurion, Commax, Kocom and BPT intercoms: gate stations, handsets and chargers, aerials, power supplies, video screens and cameras, cables, and the link that opens the gate. All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. The checks that are safe to try first are in the fault finder below.
Typical intercom prices
Market prices in Gauteng, from cost guides, installer price lists and shop listings, not ours:
- Basic audio intercom, installed: R2 500–R5 000 (Kandua)
- Video intercom, installed: R5 000–R15 000+ (Kandua)
- Intercom added during a gate motor installation: R2 000–R5 000 (published price lists of Gauteng installers)
- Commax CDV-43K video kit, in shops: about R3 700 (Takealot)
- Commax 7-inch CDV-70N kit, in shops: about R4 700 (Takealot)
Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Booking an intercom technician in Bedfordview
On the job card, give the intercom's make if you know it, whether it serves one home or a complex, and what it's doing. For a complex, add the unit numbers affected and who looks after the system. Our intercom technicians cover Bedfordview from Dowerglen and Bedford Park to Oriel, Essexwold, Senderwood, Morninghill, St Andrews, Bedford Gardens and Malvern East. Same-day repairs are offered when the day allows, and an intercom that has stopped opening the gate is treated as urgent.
Fault finder
What is your intercom doing?
Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.
What's it doing?
Likely causes
Intercom · the handset can't reach the gate unit
Most likely first
No power to the gate (caller) unit.
The handset's battery has run down.
Too far apart, or a lot of steel in between.
The handset and gate unit have lost their pairing.
Safe checks you can do
When to stop and book
Re-pairing a system or moving a unit for better range is a quick job on the visit.
From the official manuals: Zartek ZA654 manual, Zartek ZA660A manual.
Questions
Intercom questions in Bedfordview
How does a visitor call a unit on a Zartek complex intercom?
They key in the unit's three-digit code and press #, so unit 1 is 001. Only that unit's handsets ring, for 20 seconds. Read how a call runs.
Why do visitors say my intercom cuts off their first words?
The speech goes one way at a time. A visitor should wait for the two beeps and the prompt; a resident should press the talk button fully before speaking. Read why calls cut out.
Can residents open the complex gate with a code?
On a Zartek CDP-808, yes: each resident can have a four-digit door entry code, keyed in after * at the gate station. Read about the features.
Can a visitor find a unit number on the intercom?
On a CDP-808, pressing the star key twice and then # shows the residents' names in alphabetical order with their numbers, and the visitor calls from there. Read about the features.
Book a technician
Get an intercom quote in Bedfordview
Job card
We WhatsApp or call you back. Fields marked (required) are needed.