Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Gate motors · Benoni

Gate motor repairs and installation in Benoni

Sliding gate stuck halfway, motor beeping, remote dead? We repair and install gate motors, and keep automated gates running, across Benoni, from Rynfield to Northmead and Crystal Park.

Our promise

Six-month guarantee on our repairs

Emergency

24/7 emergency repairs across Gauteng

A sliding gate and its motor, with the motor, rack, safety beams, remote and battery called outOpening01Motor02Rack03Safety beams04Remote05Battery

Sliding gates in Benoni: what we fix

Sliding gates are what people in Benoni search for most, and their faults come down to a handful: a motor that won't drive the gate, a gate that stops short or opens again as it closes, a battery that dies with the power, a remote that only works from the driveway.

Benoni mixes older suburbs around the town centre with acreage and smallholdings to the north, and that changes the job. A gate across a suburban stand in Farrarmere, Northmead or Benoni Western Extension is a different load from a long gate across a smallholding driveway near Rynfield: the longer and heavier the gate, the harder the motor works over every metre of rail, and the more its battery, rack and gearbox take.

On the motor itself we fix:

  • the rack and the pinion (the toothed strip on the gate and the gear that drives it), replaced when they're worn or broken
  • batteries that won't hold a charge any more
  • the power supply and the charger that keeps the battery topped up
  • worn gearboxes
  • motors that need to go back to the manufacturer for a service, which we arrange

All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs.

Gloved hands fitting a steel gear rack along the bottom of a sliding gate, the motor's pinion gear beside it

When the gate is the problem, not the motor

A motor can only move a gate that runs freely. A lot of "motor" faults in Benoni turn out to be the gate itself: a buckled frame, a dropped panel, a wheel that's seized, a track full of grit, or a rail that has lifted where a tree root pushed under it.

We repair frame and panel damage, replace hinges, and fix and replace tracks. On a sliding gate the technician releases the motor, slides the gate by hand and feels where it binds, so you know whether the money goes on the gate or the motor before any work starts.

If you're looking for a gate manufacturer in Benoni because the gate is beyond repair, tell us when you book: we can say whether it's worth fixing, and fit and set up a motor on the new gate once it's in.

Gate motor installation in Benoni

A new motor has to suit the gate it moves. The figure that matters most is the gate's weight, and each motor we fit is built for a maximum: a Centurion D5-Evo, ET Drive 500 or Gemini 12 V DC slider for gates up to 500 kg, a Centurion D10 or ET Drive 1000 for gates up to 1,000 kg. On the longer, heavier gates of Benoni's smallholdings, the heavier-duty motors are usually the safer choice.

For an installation we check the gate runs freely first, set the motor on its base plate, fit the rack along the gate, set the open and closed limits and code your remotes. Safety beams across the opening are worth adding: with them, a closing gate stops and opens again if something crosses its path.

Our installed kit prices, and what each kit includes, are on the gate motor prices page. Swing gates in Benoni are fitted the same way, with a pair of arms instead of a rack.

Gate remotes in Benoni

Coding a remote is one of the quickest jobs on a visit. We supply remotes for the motors we work on and code them to your receiver there and then, so a lost or broken remote doesn't mean a new motor.

If several remotes have stopped at once, it's more likely the receiver than the remotes, and that's what we check first. If only one has gone, it's usually the battery inside it.

For a whole household, or the residents of a complex in Brentwood Park or Lakefield, we can code a batch of remotes in one visit.

A technician holding a gate remote beside an open motor receiver board

Centurion, ET and Gemini gate motors

We work on Centurion, ET and Gemini motors, and on Digidoor, DTS and Nice/Hansa. If you know the model, tell us when you book: the manual will say, if you still have it.

If you'd like to check a fault yourself first, our manual pages explain the status lights and beeps in plain English: the Centurion manuals, the ET Drive 500 manual and the Gemini manuals.

Telling us the make up front means the technician arrives with the right parts for it.

  • Same-day repairs

Questions

Gate motor questions in Benoni

Where can I find gate motor repairs in Benoni?

We repair gate motors all over Benoni, including Rynfield, Farrarmere, Northmead, Lakefield, Brentwood Park and Crystal Park. Book on this page or WhatsApp us and a technician will call you back to arrange the visit.

Do you repair sliding gate motors in Benoni?

Yes, sliding gates are most of the gate work we do in Benoni: motors, racks, pinions, batteries and the gate's own wheels and track. Tell us what it's doing when you book.

Can you install a new gate motor on a heavy gate in Benoni?

Yes. We weigh up the gate first, then fit a motor built for that weight, such as a Centurion D10 or ET Drive 1000 for gates up to 1,000 kg. See the kits and prices on the gate motor prices page.

Can you code new gate remotes for my motor in Benoni?

Yes, we code remotes to your motor's receiver on the visit, one or a batch for a whole household or complex. If none of your remotes work any more, we check the receiver first.

Do you work on Centurion gate motors in Benoni?

Yes, along with ET, Gemini and the other makes we work on. We are an independent repairer, not a Centurion agent. All our spare parts are genuine.

Book a technician

Get a gate motor quote in Benoni

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.