Manual · Gemini
Gemini gate motor manual: sliders, swing motors and remotes
A Gemini gate motor has no display: everything is set with a learn button, a row of DIP switches and a small dial on its control card. This is every Gemini gate motor explained from Gemini's own manuals: the 12 V slider for gates up to 500 kg, the 24 V sliders for 600 and 800 kg, the older AC slider, and the 12 V and 24 V swing motors, with a link to each official PDF.
Six-month guarantee on our repairs
1-year guarantee on every motor kit we supply and install

Which Gemini is on your gate?
Gemini's manuals cover five gate motors. The quickest way to tell them apart is how each is powered and how it knows where to stop:
| Motor | Power | How it knows where to stop | How remotes are added |
|---|---|---|---|
| 12 V DC slider | A 12 V battery, kept charged from the mains | Learns its two end stoppers on its first runs | LEARN button on the card, or the Gemlink app |
| 24 V DC slider (600 and 800) | A 24 V battery supply, kept charged from the mains | Learns its two end stoppers | LEARN button, or the Gemlink app |
| AC slider (older) | A 220 V AC motor, no battery | Aluminium stops on the rack press a limit switch | Matching DIP-switch codes in remote and receiver |
| 12 V DC swing | A 12 V battery, fed through a 17 V transformer | Open limit set by a cam; close limit fixed | A plug-in receiver with its own program button |
| 24 V DC swing | A 24 V battery, fed through a 27 V power supply | Open limit set by a cam; close limit fixed | LEARN button on the card |
The 12 V slider's PDF holds two editions: the original, for motors made from 2007 to 2025, and the latest, for motors made from 2025. The original covers two control cards, the V81 and the V90, and only the V90 takes Gemini's Gemlink smart device. Gemini's garage door operators sit with our garage door repairs.
Gemini slider specifications
| Slider 500 (12 V) | 24V Slider 600 | 24V Slider 800 | |
|---|---|---|---|
| Built for | Homes | Heavier home gates | Light industrial |
| Heaviest gate | 500 kg | 600 kg | 800 kg |
| Gate speed | 26 m a minute | 30 m a minute | 23 m a minute |
| Pull force, starting and running | 30 kgf and 17 kgf | 30 kgf and 17 kgf | 33 kgf and 18 kgf |
| Openings a day | 150 | 250 | 400 |
| Battery | 12 V 8 Ah | Two 12 V 8 Ah | Two 12 V 8 Ah |
| Gearbox | Oil-filled worm drive, 23 to 1 | Oil-filled worm drive, 23 to 1 | Oil-filled worm drive, 23 to 1 |
| Gemlink smart device | Compatible | Included | Included |
All three have a 17-tooth pinion, an on-board receiver for 30 remotes and auto-close from 2 to 60 seconds. Gemini's figures assume track wheels at least 80 mm across on roller bearings, running on a straight and level track, and the openings a day assume a gate that needs less than half the motor's force. Speed varies with load.
The latest 12 V manual gives a 7 Ah or 12 Ah battery, and recommends 12 Ah for a busy gate or longer backup through power cuts.
Putting a Gemini on manual, and back
Every Gemini DC slider has a red release lever, locked with the key supplied with the motor.
- To release: unlock the red lever and open it. The gate now moves freely by hand, in either direction, so keep hold of it.
- To re-engage: move the gate to about halfway, close the red lever, then push the gate slowly by hand until you hear a click. The gearbox has engaged.
Gemini's one rule here: never release or engage the motor while the gate is moving. A lever that isn't fully home shows up as four beeps or flashes when the motor is triggered, explained on Gemini gate motor problems.
On the older AC slider the lever works the other way round: lowered to release the gate, raised to engage the pinion again, with a lug for a padlock.
Setting up a Gemini slider: how it learns its stops
A Gemini DC slider has no limit switches to adjust. It learns where to stop from two solid end stoppers, which Gemini makes compulsory: the motor uses them on every run, and they keep the gate from overrunning its track. Gemini's setup, from the latest manual:
- With the mains and battery connected, release the motor, move the gate to halfway and re-engage it, pulling the gate gently until the gearbox locks.
- Press the test button on the control card, or a remote. The gate closes slowly and stops at the closing stopper. If it doesn't close fully, the stopper is moved.
- Press again. The gate opens slowly to the opening stopper, and both ends are learnt.
- Test the obstruction sensing and adjust it if needed.
If the gate opens on the first press instead of closing, the motor direction is set the wrong way. It's one DIP switch on the card, chosen by where the motor stands when you're inside the property facing the road: motor on the left, LEFT/OFF; motor on the right, RIGHT/ON.
When a stopper is moved later, the motor has to learn again. Gemini's instruction is to disconnect one battery terminal and the mains, then repeat the whole setup, and since that means opening the motor, it's a job for us.
The older AC slider works differently: aluminium stops clamped to the rack with grub screws press its limit-switch spring at each end, and they're slid along the rack until the gate stops in the right place. Its direction is set by a jumper on three pins, and its first press should open the gate.

Programming Gemini remotes
The remotes that come with a new Gemini are already learnt. To add another to a DC slider or the 24 V swing motor:
- Press and hold a button on the new remote.
- While holding it, press and release the LEARN button on the control card.
- The receiver light on the card flashes twice. Let go of the remote button.
- Repeat for every remote, or every button you want to use.
The on-board receiver holds 30 remotes. When it's full, its light (LD2) flashes five times and nothing more can be learnt. The manuals give one way to remove remotes from it: clear them all by holding LEARN until the light goes off (about 10 seconds on the 24 V swing), then learn again every remote you're keeping. That's also the answer to a lost or stolen remote.
On motors fitted with Gemlink, remotes can also be learnt from the Gemlink app, which can set a button to open the pedestrian opening. A remote of another make needs a compatible external receiver connected to the card.
Older Gemini receivers learn differently:
- 12 V DC swing: a press of the program button on its plug-in receiver starts learn mode, and the light flashes once. Each remote is then pressed at least a metre away, and three flashes confirm it. It holds 32 remotes, and holding the program button for about five seconds leaves learn mode.
- AC slider: nothing is learnt. The remote and receiver each have 12 DIP switches that must match, set to your own random code, since they leave the factory on a standard one.
Gemini's manuals put poor range down to a flat remote battery or something blocking the receiver. To change the battery, open the back with a small flat screwdriver, check the contacts are clean and free of corrosion, and fit the new battery with its negative (−) end towards the spring.

Auto-close: the four DIP switches
The auto-close delay is set with four DIP switches on the control card, numbered 1 to 4, where 1 means on and 0 means off:
| Switches 1 2 3 4 | Gate closes after |
|---|---|
| 0000 | Never: auto-close off |
| 1110 | 2 seconds |
| 1000 | 10 seconds |
| 0100 | 20 seconds |
| 1100 | 30 seconds |
| 0010 | 40 seconds |
| 1010 | 50 seconds |
| 0110 | 60 seconds |
Gemini's own example is 50 seconds: switch 1 on, 2 off, 3 on and 4 off. The same table appears in the DC slider, AC slider and 24 V swing manuals.
There's also a wire loop on the connector block for auto-close. With the loop taken off, the gate never closes by itself, whatever the switches say. Gemini's latest manuals suggest putting a time-lapse relay in place of the loop, to switch auto-close off during set times.
Townhouse mode, beam follower and obstruction sensing
- Townhouse function: one DIP switch. With it on, the gate ignores every command except its beams and obstruction sensing from the moment it starts opening until the auto-close time is up, so a second press can't stop it at a shared entrance.
- Infra-red beam follower: while the gate opens, a broken beam stops it; once the beam clears, it closes behind the car or person.
- Obstruction sensitivity: a small dial on the card, set at the factory and adjusted to suit the gate. Clockwise makes it less sensitive, anticlockwise more. Gemini wants it set so the gate stops and reverses if it touches something while closing. On the AC slider the same job is done mechanically, by spring-tension nuts on either side of the motor.
| What happens | While closing | While opening |
|---|---|---|
| Remote or button pressed | Stops and opens again | Stops and waits; auto-close then closes it |
| Something in the way | Stops and opens; auto-close tries again | Stops and waits; auto-close then closes it |
| Townhouse function on | A button can't stop it | A button can't stop it |
After three obstructions in a row while closing, the gate moves about 200 mm back from the obstruction and waits for the next command.
Gemini wiring: what connects where
The connector block on a Gemini DC slider is labelled, and accessories connect to it like this:
| Accessory | Where it connects |
|---|---|
| Push button | COM and TRIG |
| Pedestrian push button | COM and PED |
| Infra-red beams | COM, IR BEAM and 12V+ |
| Keypad or extra receiver | COM, plus TRIG or PED for the opening it should give |
| Auto-close | A wire loop; taking it off stops auto-close |
| Power for beams or a keypad | The auxiliary supply point, 1 A at most |
| Courtesy light | A connection on the card for a 220 V light |
| Battery | Red lead to positive (+), black lead to negative (−) |
On the original edition an extra receiver plugs into the card's RECEIVER PLUG; on the AC slider, into RX IN.
Gemini's first warning is never to work on the system with the power connected. The mains must reach the motor through an isolator switch, normally within a metre of it, never wired straight from a power source, and the power supply's fuse is 0.5 A at most. Mains wiring to the motor is a job for a registered electrician.
The latest DC sliders also take a solar adaptor board. Plugged into the power supply's solar connection, it lets the battery charge from the mains or from a solar panel, which Gemini calls hybrid mode.
Gemlink: opening a Gemini from your phone
Gemlink is Gemini's smart device: a small module that plugs into the Comm port on the control card and talks to a phone over Bluetooth and Wi-Fi. Its blue light flashes once it's connected, and the app is downloaded from a QR code in the manual. Gemini lists:
- live status of the gate
- light control
- access logs
- sharing gate access with others
- opening the gate from a smartphone
- free app access for 30 users
On the original 12 V slider only the V90 card takes Gemlink, so a slider with the older V81 card is upgraded by changing the card to a V90 and adding the device. Gemini says every slider in its SEL range can be made smart this way, and its spec sheets list Gemlink as included with the 24V Slider 600 and 800.
Gemini swing motors: arms, limits and double gates
Gemini's swing motors drive each leaf through a crank arm and a connecting arm, one motor per leaf: a master, plus a slave on a double gate.
| 12 V DC swing | 24 V DC swing | |
|---|---|---|
| Speed | 10 seconds for 90° | 10 seconds for 90° in the manual, 9 on the spec sheet |
| Battery | 12 V | 24 V 5 Ah |
| Mains supply | Through a 17 V transformer | Through a 27 V power supply |
| Remotes | 32, on a plug-in receiver | 30, on the control card |
| Weight | About 26 kg | About 26 kg |
The 24 V swing's spec sheet gives a longest leaf of 2 m and about 30 openings a day, so it's a motor for a home gate. How Gemini sets one up:
- The post's mounting flange stands at least 300 mm above the ground.
- The gate bracket is placed so the crank arm's end is the same distance from it with the gate closed and opened to 90°; then the connecting arm is cut and welded, and the crank arm locked with a 10 mm hex key.
- The close limit isn't adjustable. The open limit is set by turning a cam on the worm wheel, reached by flipping the master motor's control board.
- A link on the card selects one motor or two, and the pedestrian button opens the master leaf only, closing it again after 10 seconds.
- On the 24 V swing, DIP switch 3 sets the motor direction, and DIP switch 4 is turned on when a magnetic lock is fitted, so the slave leaf opens first and closes last and the two leaves can't wedge against each other. The 12 V swing sets direction with a jumper.
- A courtesy light switches on as the gate opens and off about three minutes after it closes. The card's relay only switches it; it doesn't power the light.
Every six months, Gemini advises taking the lid off and blowing out the dust with low-pressure air, and on the 24 V swing greasing the main gear too. For a gate that moves with difficulty, Gemini's fault table points at the hinges: lubricate or replace them.

The complex receiver, for estates and townhouses
For a shared gate, Gemini's site carries the manual for a complex receiver, made by MicroTeq, that stores 500 remotes in 100 locations of five. Each location can stand for a unit or townhouse number, so every remote belongs to a unit, and the receiver's display shows the unit and remote number each time a remote opens the gate.
- Adding a remote: with a link (LINK1) moved from NORMAL to PROG, the unit number is chosen with the PREV and NEXT buttons and the remote's button held until the display confirms it.
- Removing a lost remote: chosen by unit and remote number, so the remote itself isn't needed. Holding the FUNC button for longer clears all five remotes of that unit. A remote that's still at hand can be removed with Search & Erase, by pressing it.
- Backup: the whole memory can be copied to a backup module and restored onto a new receiver, which is what saves a complex from recoding every remote after lightning.
Program mode means opening the receiver, so it's work we do on site.

Looking after a Gemini slider
Gemini's maintenance list is mostly about the gate: wheels that run the whole track without seizing, roller guides, the rack 2 mm above the pinion, end stoppers at both ends, and a clean, level track with a furrow to drain water. Gemini also warns against greasing the gate, because grease collects dirt and turns into a grinding paste, and against letting insects, water, mud or sand into the motor.
A new Gemini's gearbox is filled from the bottle in the box before its first run. On the latest models the fill point has a dipstick, and Gemini warns against adding more, because overfilling may cause leaks.
When to call us
We install, set up and repair Gemini sliders and swing motors: V81 and V90 control cards, pulse sensors, gearboxes, receivers, batteries and remotes, and we fit Gemlink and the complex receiver. All our spare parts are genuine, and every repair carries our six-month guarantee on our repairs.
| Item | Typical shop price |
|---|---|
| Gemini 12 V DC slider (500 kg) | about R5 000–R7 400 (the lower figure with battery and 2 remotes; Takealot) |
| Gemini remote | R200–R250 (Takealot) |
Prices checked October 2026. Our installed Gemini kit is on the card below. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Sliding gate kit
Gemini 12 V DC slider kit
R6 999incl. installation
In the kit
- Gemini DC slider (gates up to 500 kg)
- 2 × 3-button Gemini remotes
- 12 V 7 Ah battery
- 4 m steel rack
Our promise1-year guarantee on every motor kit we supply and install
Prices checked October 2026. Price includes the kit listed, standard installation on a gate or door that already runs freely, and our 1-year kit guarantee. Not included: a power point at the motor if there isn't one (a job for a registered electrician), extra rack, gate or door repairs, and accessories. These are quoted before any work starts.
Gemini's PDFs
- Gemini 12V DC sliding gate motor, installer manual: both editions, with the V81 and V90 cards
- Gemini 24V DC slider manual: the 24 V sliders
- Gemini AC sliding gate motor, installer manual: the older 220 V slider
- Gemini DC swing gate motor, installer manual and Gemini 24V swing gate motor, installer manual
- Gemini Complex receiver, installer manual
- Spec sheets: Gemini 12V DC slider 7 Ah (spec sheet), Gemini 24V 600 slider (spec sheet), Gemini 24V DC slider Complex (spec sheet) and Gemini DC swing (spec sheet)
What the status light means and what to check when a Gemini stops is on Gemini gate motor problems, and the brand as a whole on Gemini.
Questions
Gemini manual questions
How do I program a Gemini remote?
Hold a button on the new remote, press and release the LEARN button on the motor's control card, and let go of the remote when the receiver light flashes twice. The card holds 30 remotes, and on motors with Gemlink the app can learn them too. See the steps.
How do I reset a Gemini remote?
A Gemini remote isn't reset on its own; the receiver's memory is. Holding the LEARN button until the receiver light goes off clears every remote, and each one you're keeping is then learnt again. If one remote has simply stopped, try a new battery first. Read about remotes.
How to program Gemini remote without learning button?
Gemini's manuals give two ways to add a remote: the LEARN button on the control card, or the Gemlink app on a motor fitted with a Gemlink device. None describes learning a remote from another remote, so without Gemlink the card has to be reached. See both methods.
How to set a Gemini gate motor?
A Gemini DC slider learns its own limits: with the gate engaged at halfway, the first press closes it slowly to the closing stopper and the second opens it to the opening stopper. If it opens first, the motor direction DIP switch is the wrong way round. See the setup.
How do I put a Gemini gate on manual?
Unlock the red release lever with the motor's key and open it; the gate then moves freely by hand. To re-engage, move the gate to about halfway, close the lever and push the gate slowly until the gearbox clicks in. Read the steps.
What is the difference between the Gemini V81 and V90 boards?
They're the two control cards in Gemini's original 12 V slider manual, and they're set up with the same DIP switches and LEARN button. Only the V90 takes the Gemlink smart device, so a V81 slider is made smart by fitting a V90 card and Gemlink. Read about Gemlink.
Book a technician
Get a gate motor quote
Job card
We WhatsApp or call you back. Fields marked (required) are needed.