Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Gate motors · Midrand

Gate motor repairs in Midrand, from homes to office parks

A D10 on a Waterfall office park that stops halfway, a sliding gate in Noordwyk that has come off its rail, thirty remotes to code for a complex in Vorna Valley: we repair and install gate motors across Midrand, Centurion motors above all.

Our promise

Six-month guarantee on our repairs

Our promise

1-year guarantee on every motor kit we supply and install

Midrand

Midrand and the areas around it. Every area we cover

A D5-Evo for the house, a D10 for the office park

Midrand mixes houses and townhouses with office parks, warehouses and estates, and its gates differ as much as its buildings. Centurion's sliding gate motors cover that spread:

  • The D5-Evo is the home motor, for gates up to 500 kg.
  • The D10 is Centurion's heavy-duty motor, for gates up to 1,000 kg, and its manual names townhouse complexes and office parks as the work it's built for, at up to 750 operations a day.
  • The D10 Turbo runs at almost twice the D10's speed, for busy entrances with lighter gates of up to 240 kg. Because it's so fast, Centurion makes safety beams on both the opening and the closing side, and a sensitive edge on the gate, compulsory with it.

Before choosing, we measure the gate with a pull scale: the force it takes to start it moving and the force to keep it rolling. A D10's limits are 40 kgf and 30 kgf, and the manufacturer's warranty is void on a gate that needs more. A gate made heavier with cladding, or one that drags, can be over the limit without anyone knowing. The full specifications are on the Centurion D10 manual.

Gloved hands fitting a steel gear rack along the bottom of a sliding gate, the motor's pinion gear beside it

Estates and office parks: Condominium Mode

Centurion's D5-Evo and D10 controllers have a setting written for gates that many people share. Centurion's guide calls it Condominium Mode and says it's ideal for townhouses, estates, factories and office parks. In it:

  • A press of a remote, or of the gate button on an intercom, opens the gate. Pressing again while it opens does nothing, so a second driver can't stop it halfway.
  • The gate closes only on its own timer, which this mode switches on automatically and which can't be overridden.
  • A press while the gate is closing opens it again; a press while it stands open starts the timer afresh.

That's why an estate gate can seem to ignore a remote: it's doing what it was set to do. Centurion strongly recommends safety beams with this mode, so the timer never closes the gate on a car or a person. A home gate usually runs in Standard or Reversing Mode instead. We set the mode, the timer and the beams to suit how the gate is used.

Gate remotes in Midrand

A D10's built-in receiver holds up to 500 remote buttons, so a complex or office park with a long list of users can run on the motor's own receiver. Every button counts: a four-button remote takes four places. A second button can be set to the pedestrian opening, which opens the gate just wide enough for someone on foot, after a short warning pause.

On a Midrand estate or office park, three habits keep remotes under control:

  1. A register: which remote, which memory number, which person or unit.
  2. Deleting on the day someone leaves, by memory number, so a remote that isn't handed back stops working.
  3. Spare remotes coded ahead, so a new tenant or employee isn't left at the gate.

We code new remotes, delete old ones and draw up the register. The step-by-step for Centurion receivers is on how to program a Centurion remote.

A technician holding a gate remote beside an open motor receiver board

Sliding gates that take a beating

Office park and warehouse gates in Midrand are wide, heavy and busy, and wear in their own ways:

  • A gate struck by a vehicle: a bent rail or a buckled frame, and a rack that no longer meets the pinion. The D10 senses a collision and reverses, but it can't straighten a rail.
  • Wheels and guide rollers worn down on a gate that runs hundreds of times a day.
  • A rack worn at one spot, where the gate always starts or stops.
  • Grit and building rubble on the rail, in a city that is still building.

On a home gate in Halfway House or President Park they come more slowly. We release the motor, run the gate by hand and fix the gate first, because a motor pushing a gate that drags won't last. How a sliding gate is built and kept running is on sliding gates.

Centurion gate motor repairs near Midrand

The other repairs we do on Midrand's Centurion, ET and Gemini motors:

  • Batteries that give out partway through load-shedding. A D10 runs on two 7 Ah batteries as standard, and a gate that opens all day drains them faster.
  • Chargers that have stopped charging, often after a surge.
  • Control cards damaged by lightning. The D10 has surge protection built in, but a nearby strike can still get through.
  • Safety beams knocked out of line by a truck or a garden service, so the gate won't close.
  • Limits that have drifted, so the gate stops short of the post or bumps it.

All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. The checks that are safe to do yourself are in the fault finder below.

Gate motor installation in Midrand

For a home in Midrand, a new motor comes as a kit at a set price, fitted, with its battery and remotes: the Centurion D5-Evo SMART sliding gate kit at R7 999 or the ET Drive 500 sliding gate kit at R6 999 for a sliding gate up to 500 kg, and the Centurion Vantage 500 double swing kit at R15 799 for a pair of swing gates. A D10 for a heavy or busy gate is quoted for the site, after we've weighed up the gate and its traffic. Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

  • Sliding gate kit

    Centurion D5-Evo SMART sliding gate kit

    R7 999incl. installation

    In the kit

    • D5-Evo SMART motor (gates up to 500 kg)
    • 12 V 7 Ah battery
    • 2 × 4-button NOVA remotes
    • 4 m steel rack
    Our promise

    1-year guarantee on every motor kit we supply and install

  • Sliding gate kit

    ET Drive 500 sliding gate kit

    R6 999incl. installation

    In the kit

    • Drive 500 (gates up to 500 kg)
    • 12 V 7 Ah battery
    • 4 m steel rack
    • 2 × 4-button ET remotes
    Our promise

    1-year guarantee on every motor kit we supply and install

  • Swing gate kit

    Centurion Vantage 500 double swing kit

    R15 799incl. installation

    In the kit

    • 2 operators
    • wall box with charger
    • 12 V 7 Ah battery
    • mains isolator
    Our promise

    1-year guarantee on every motor kit we supply and install

Prices checked October 2026. Price includes the kit listed, standard installation on a gate or door that already runs freely, and our 1-year kit guarantee. Not included: a power point at the motor if there isn't one (a job for a registered electrician), extra rack, gate or door repairs, and accessories. These are quoted before any work starts.

Compare two kits

SpecCenturion D5-Evo SMART sliding gate kitET Drive 500 sliding gate kit
Price, installedR7 999R6 999
ForSliding gateSliding gate
In the boxD5-Evo SMART motor (gates up to 500 kg)Drive 500 (gates up to 500 kg)
In the box12 V 7 Ah battery12 V 7 Ah battery
In the box2 × 4-button NOVA remotes4 m steel rack
In the box4 m steel rack2 × 4-button ET remotes
Guarantee1-year guarantee on every motor kit we supply and install1-year guarantee on every motor kit we supply and install

Booking a gate technician in Midrand

On the job card, give the motor's make and model from its cover, what the gate is doing, and on a business site, the hours and the person who can let us in. We work across Midrand, from Halfway House, Vorna Valley and Noordwyk to Randjespark, Midridge Park, Waterfall and President Park. Same-day repairs come out of Midrand's normal week too, and a gate stuck open after hours goes to the top of the list.

Fault finder

What is your gate doing?

Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.

What's it doing?

Likely causes

Gate motor · it's beeping

Most likely first

  1. The mains power to the motor is off, so it's running on its battery. Centurion and Gemini motors give two beeps (or two flashes) in a row; an ET Drive flashes twice and gives a one-second beep every 15 seconds.

  2. The battery is low. Centurion and Gemini motors give three beeps in a row; an ET Drive's status light flashes four times, without a beep.

  3. Something is between the safety beams. A Centurion motor gives a single beep every so often and won't close.

  4. The gate has hit something several times in a row, so the motor has stopped to protect itself. A Centurion keeps beeping until that's cleared.

  5. A holiday lockout or a time setting is blocking the remote: the motor beeps once when you press it and the gate doesn't move.

  6. On a Gemini, four beeps as the motor starts means the manual release lever isn't fully engaged.

Safe checks you can do

When to stop and book

If it keeps beeping with the power on and the beams clear, the battery, charger or controller needs a technician. Don't open the motor: Centurion warns that work by anyone unauthorised may void the manufacturer's warranty.

Questions

Gate motor questions in Midrand

Do you repair Centurion D10 gate motors in Midrand?

Yes: batteries, chargers, control cards, beams and limits on the D10 and D10 Turbo, as well as the D5-Evo, on homes, estates and office parks across Midrand. Read about the D10.

Why does our estate gate ignore a second press of the remote?

It's probably set to Centurion's Condominium Mode, where a second press while the gate opens is ignored and only the timer closes it. That's by design, for shared gates. Read about Condominium Mode.

How many remotes can a Centurion D10 hold?

Its built-in receiver holds up to 500 remote buttons, and each button counts, so a four-button remote takes four places. We keep a register of who holds which. Read about remotes.

Can a remote open the gate just wide enough to walk through?

Yes, on a D5-Evo or D10: a second remote button can be set to the pedestrian opening, which opens the gate only part of the way. Read about remotes.

Book a technician

Get a gate motor quote in Midrand

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.