Palisade and weld mesh · Midrand
Palisade fencing in Midrand, ClearVu-type and weld mesh
ClearVu-type mesh along an office front in Waterfall, palisade for a new house going up in Noordwyk, high weld mesh round a sports field in Vorna Valley: we supply, install and repair steel fencing across Midrand, with gates to match.
Six-month guarantee on our repairs
Midrand and the areas around it. Every area we cover
Business park fronts that stay in view
Along Midrand's business parks and office fronts, ClearVu-type high-security mesh is a fence people search for by name. Its rigid panels of thick, closely spaced wire leave no gap for fingers or the toe of a shoe and are slow to cut, but from the road they almost disappear. That suits a business that wants to look open while staying closed: the building and its signage stay visible, and so does anyone near the fence, to a patrol or a camera. Panels powder-coated in black or charcoal look tidy against glass and plaster, and they keep a uniform look the length of a park.
For the cameras that go with it, see CCTV in Midrand.

Mixing fences along one boundary
A boundary rarely needs the same fence all the way round, and mixing them spends the money where the risk is:
- Street front: ClearVu-type mesh, to stay in view, or palisade, as the strongest and most obvious deterrent.
- Sides shared with neighbours: weld mesh panels, neat and economical.
- The back, on open ground: palisade or a high mesh, often with an electric fence along the top.
- Long runs over uneven ground: weld mesh rolls, which follow the slope and cost least per metre.
We price each stretch on its own line, so you can see what each choice costs. How the three compare is set out on weld mesh fencing.
Fencing a new stand
Midrand is still building, and a new house or premises is the best time to get a fence right, because it can be planned with everything that meets it:
- The gate and its motor. A sliding gate needs a straight run inside the boundary to open along; a swing gate needs room to open inwards. Both are made in the same profile as the fence.
- The cables. Conduit for the gate motor, intercom and cameras goes in before the driveway is paved, not after.
- An electric fence. If one is coming, the posts are chosen long and strong enough for its brackets from the start.
- The building work itself. An early fence helps protect materials on site, but heavy vehicles can damage it, so the permanent fence often goes up once they're done.
Gate motors for the new gate are on gate motors in Midrand.

Schools, campuses and sports fields
Fencing for schools and colleges asks different things of a fence. The street front needs to be strong and plainly closed, which suits palisade. Sports fields need height, so balls stay in and spectators can still see through, which suits high weld mesh. And the gates must handle crowds at the start and end of the day: wide vehicle gates, separate pedestrian gates in the same profile, and locks the staff can manage. A steel pedestrian gate typically costs R2 500–R6 000 (Completo) in the market.
From a measured line to a finished fence
- We measure the line and confirm the boundary, marking slopes, pillars, gates and anything buried.
- Posts are set in concrete at the spacing the fence needs, and left to cure.
- The fence goes on: pales bolted to rails, mesh panels clamped to the posts, or rolls strained between them.
- Gates are hung and checked, ready for a motor if one is coming.
- Cut edges are touched up so bare steel doesn't rust, and the site is cleared.
Repairs
Steel fences fail in a few familiar ways: a section hit by a vehicle, pales or panels cut out, clamps stolen, posts loosened, and rust starting at the base where the ground stays wet. We repair the damaged stretch to match the rest. Six-month guarantee on our repairs.
Steel fencing prices in Gauteng
Typical market prices, supplied and installed, not ours:
- ClearVu-type high-security mesh: R1 300–R1 600 a metre (ProCompare); R1 200–R1 700 a metre (Completo)
- weld mesh: R600–R800 a metre (ProCompare)
- 1.2 m palisade: R900–R1 500 a metre (Kandua)
- 2.4 m palisade: R2 000–R3 000 a metre (Kandua)
- a ClearVu-type panel kit (1.8 × 2.5 m), in shops: about R4 600 (Takealot)
Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Booking a fencing quote in Midrand
On the job card, give the boundary's rough length, the fence you have in mind for each side, and the gates; photos along the line help. We work across Midrand, from Waterfall, Noordwyk and Vorna Valley to Halfway House, Randjespark and President Park. A fence that's been driven through or cut is urgent: Same-day repairs can be arranged when the day's bookings allow.
Questions
Fencing questions in Midrand
Do you install ClearVu-type fencing in Midrand?
Yes, for business parks, offices, estates and homes across Midrand, usually on street fronts where the property needs to stay in view. Read about business park fronts.
Which fence should go on which side of my property?
Usually the strongest or most see-through fence on the street front, weld mesh panels along the neighbours, and palisade or high mesh at the back if it faces open ground. Read about mixing fences.
When should a new house in Midrand be fenced?
Plan it with the gate, motor and cabling before the driveway is paved, and put the permanent fence up once the heavy building work is done. Read about new stands.
What fencing suits a school sports field?
High weld mesh, which keeps balls in while spectators see through, with palisade on the street front and separate pedestrian gates for busy times. Read about schools.
Book a technician
Get a palisade fencing quote in Midrand
Job card
We WhatsApp or call you back. Fields marked (required) are needed.