Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Palisade and weld mesh · Sandton

Palisade fencing in Sandton, with mesh and matching gates

A fence contractor in Sandton for the whole job: palisade along a street front in Benmore, see-through ClearVu-type mesh round a complex in Wendywood, a perimeter for an office in Sandown, with the gates to match and an electric fence on top where it's wanted.

Our promise

Six-month guarantee on our repairs

Sandton

Sandton and the areas around it. Every area we cover

Street fronts that stay open to view

Plenty of Sandton homes sit behind solid walls. Opening up the street front with steel fencing changes how the boundary works: a see-through fence lets neighbours, patrols and passing cars see the property, so there's nowhere for anyone to work unseen at the gate, and it lets light and air into the garden.

The choice is between:

  • Palisade: vertical steel pales with pointed tops, bolted to rails between posts. Strong, clearly a security fence, and it stands up well to a vehicle.
  • ClearVu-type high-security mesh: rigid panels with openings too small for fingers or toes. Very hard to climb or cut, and from a few metres away it almost disappears.

Either can run between brick pillars, which suits a street front that keeps part of an old wall, and either can be galvanised and powder-coated in black or charcoal to match the house.

A new black steel palisade fence and sliding gate along a suburban property

Complexes and office parks

A long perimeter is rarely one kind of fence all the way round. In a complex or an office park, the street front and the entrance usually take palisade or ClearVu-type mesh, where the fence is seen and tested most, while the sides and back can take weld mesh, a welded wire grid in rolls or panels, at a much lower cost per metre. More on mesh is on weld mesh fencing.

At the entrance, the fence, the vehicle and pedestrian gates, the motor, the safety beams and the intercom are best planned together, because the posts, motor bases and cable runs go in once. We install all of them.

A dark mesh fence around a townhouse complex with a planted garden in front

Gates and motors in the same profile

A driveway gate made in the same palisade or mesh as the fence keeps the boundary looking like one piece. If it's going to be automated, it's built for the motor from the start: a straight bottom rail for the rack on a sliding gate, or posts that can take the arms of a swing motor. A pedestrian gate beside it typically costs R2 500–R6 000 (Completo) in the market (prices checked October 2026). For the motor itself, see gate motors in Sandton.

An electric fence on top

Palisade and mesh both carry an electric fence well: brackets bolted to the tops of the posts hold the live lines above the steel, insulated from it, and the steel is earthed. Anyone who climbs meets the electric fence at the top. The electric part gets its own energiser, zones and certificate, and is covered in detail on electric fences in Sandton. Everything else we do in the area, from garage doors to cameras, is on our Sandton page.

From survey to finished fence

  1. Survey and boundary. We measure the line and note pillars, slopes, gates and services underground, and the boundary is confirmed before anything is dug.
  2. Posts. Set in concrete at the spacing the fence needs, and left to cure.
  3. The fence. Rails and pales, clamped mesh panels, or tensioned mesh rolls.
  4. Gates. Hung, checked and, if they're being automated, prepared for the motor.
  5. Finish. Cut and drilled steel touched up so it doesn't rust, and the site cleared.

In an estate, the fence may need the estate's approval for its height, look and colour first, so ask the managing agent before ordering.

Technicians installing tall mesh security fence panels along a boundary

Repairs

We repair palisade and mesh as well as installing it: a section hit by a car, pales or panels cut out by someone getting in, posts loosened, clamps and bolts that have gone missing, and rust at the base where sprinklers keep the steel wet. A damaged stretch is repaired to match the rest, so the whole fence doesn't have to go. Six-month guarantee on our repairs.

What steel fencing typically costs

Typical market prices in Gauteng, supplied and installed, not ours:

  • steel palisade, all heights: R1 100–R2 400 a metre (ProCompare); R1 200–R2 500 a metre (Completo)
  • 2.4 m palisade: R2 000–R3 000 a metre (Kandua)
  • steel palisade with pillars: R3 100–R3 800 a metre (ProCompare)
  • ClearVu-type high-security mesh: R1 300–R1 600 a metre (ProCompare); R1 200–R1 700 a metre (Completo)
  • weld mesh: R600–R800 a metre (ProCompare)

Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Booking a fencing quote in Sandton

On the job card, tell us the rough length of the boundary, the fence you have in mind, where the gates go and whether an electric fence will go on top. Photos along the line help us quote close to the final figure from the first visit. For damage, one photo is enough to start.

We work across Sandton, from Gresswold and Gallo Manor to the streets around Sandton City. Same-day repairs are part of the normal week here for fence and gate damage, whenever the day's bookings allow.

Questions

Fencing questions in Sandton

Can you replace a boundary wall with palisade in Sandton?

Yes, the street front of a wall can be opened up with palisade or ClearVu-type mesh, keeping the existing pillars where they're sound and fencing between them. It lets the property be seen from the street while staying hard to climb. Read about street fronts.

Is ClearVu fencing better than palisade?

They do different jobs: palisade is the stronger deterrent and stands up better to a vehicle; ClearVu-type mesh is harder to climb or cut and almost disappears from a distance. A complex can combine both. Compare them.

Do you supply and install the gates too?

Yes. Driveway and pedestrian gates are made in the same profile as the fence and hung by us, and a driveway gate can be built ready for a sliding or swing motor, which we also fit. Read about gates.

How much does palisade fencing cost in Sandton?

Published cost guides put steel palisade at R1 100–R2 400 a metre; R1 200–R2 500 a metre supplied and installed, and with pillars R3 100–R3 800 a metre (prices checked October 2026). Height, finish and gates change the total. See typical prices.

Book a technician

Get a palisade fencing quote in Sandton

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.