Brands · DTS
DTS gate motor repairs: problems, spares and remotes
DTS motors are still opening gates and garage doors all over Johannesburg, many of them installed years ago, and when one stops the owner often can't find a manual or a dealer. We repair DTS gate motors and the garage motors that carry the name: batteries, boards, remotes, gears and wiring. Here's what usually goes wrong, what you can safely check yourself, and how we decide between a repair and a new motor.
Six-month guarantee on our repairs
24/7 emergency repairs across Gauteng

The DTS motors we see
Owners usually know their DTS by the number on the cover, such as the DTS 500 or DTS 600, or simply as "the DTS" on the driveway gate. Like other sliding gate motors, a DTS has the same main parts, and that's how we repair one:
- the motor and gearbox, which drive a pinion along the rack on the gate;
- the control board, which reads the remotes, the safety beams and the gate's limits and decides when to run;
- the battery and charger, which keep it running through a power cut;
- the receiver and remotes;
- the manual release, so the gate can be opened by hand.
Knowing which part has failed is most of the work, and the symptom usually points to it.

Common DTS gate motor problems
- Not working at all: no power at the motor, a flat or failed battery, a blown fuse, or a board damaged by a surge.
- Not opening, but it clicks or hums: a battery too weak to move the gate, a gate that's dragging or off its track, or a worn gearbox.
- The battery isn't charging: the battery has reached the end of its life, or the charger or the mains supply to the motor has failed. A battery that won't hold a charge is the single most common fault on any gate motor.
- Beeping or a flashing light: the motor is reporting something, usually low battery, a blocked safety beam or a problem with the gate's travel. Without the manual for your exact model we don't guess what a pattern means; we read it on site.
- Opens but won't close: usually the safety beams are blocked, dirty or out of line.
- Remotes stopped working: a flat remote battery, a remote that lost its code, or a receiver fault.
- Stops halfway or reverses: the gate is meeting resistance, or the limits have shifted.
Safe checks before you call
- Is there power? Check the isolator switch at the motor or in the house, and that the distribution board hasn't tripped.
- Has there been load shedding? A long power cut can flatten an old battery. Give it time on mains, then try again.
- Is the remote's battery flat? Try a second remote, or the wall button or keypad if you have one.
- Are the safety beams clear? Look for leaves, a spider's web, a parked car or a pot plant between them, and wipe the lenses.
- Is the gate free? Release the motor as the cover or your installer showed you, and push the gate along its track by hand. If it's stiff, catches or comes off the track, the gate is the problem, not the motor.
Stop there. Don't open the control box or work on the mains wiring: that's a job for a technician, and on the mains side, a job for a registered electrician.
Resetting and programming a DTS
"How do I reset my DTS?" is the question we're asked most. On most gate motors a reset clears the stored limits and settings, and sometimes the remotes too, so the motor has to be set up again afterwards: its open and closed positions, its force and its remotes. The exact steps differ from model to model.
We don't publish DTS reset or programming steps, because we hold no DTS manual to take them from, and a wrong sequence can leave a gate running past its stops or deleting every remote in the house. What we'd suggest:
- Switching the motor off and on again at the isolator, and disconnecting and reconnecting the battery, is safe, and clears a motor that has simply hung.
- A full reset, limit setting and remote coding are done on site by a technician, who then tests that the gate stops and reverses properly for a car or a person.
DTS remotes
A remote that has stopped working usually needs a new battery first. If that doesn't help, it may have lost its code, or the receiver in the motor may have a fault. We code new remotes to DTS receivers, and where the original remotes are no longer available, we fit a compatible receiver so that remotes that are easy to buy will work. A new remote and programming typically costs R350–R750 (Kandua) in the market.

Spares for DTS gate motors
DTS spares are harder to find than parts for the brands still sold in every hardware store, which is often why a DTS stays broken. We source what's available: batteries, control boards, gears, pinions, receivers, remotes and safety beams. Batteries and beams are standard parts and easy to replace; boards and gearbox parts depend on the model and on stock. All our spare parts are genuine where the parts are still made, and if one isn't, we tell you before any work is done.
Typical figures in the market for the parts that fail most:
- 12 V 7 Ah lead-acid battery: R450–R900 (Kandua)
- Control board replaced: R1 500–R4 000 (Kandua)
- Safety beams replaced: R600–R1 200 (Kandua)
These are the market's figures, not ours. Prices checked October 2026.
Repair or replace?
A DTS with a flat battery, dirty beams or a lost remote is worth repairing: those are small, quick jobs. It becomes a harder call when the board has been burnt out by a surge on an old motor, the gearbox is worn, or the part isn't available. Then a new motor can make more sense, and the rack, the beams and often the wiring can usually be kept.
For comparison, an ET Drive 500 kit (500 kg) costs about R6 260 (Takealot) in shops, and a Centurion D5-Evo SMART / SMART+ kit (500 kg) about R7 500–R8 000 (Takealot), before installation. We'll tell you plainly which way we'd go, with both prices. More on gate motor repair costs and gate motor prices.
Booking a DTS repair
We repair DTS gate motors across Johannesburg, the East Rand and Centurion, as well as Centurion, ET, Gemini, Digidoor and Nice/Hansa motors. Tell us what the motor is doing, and send a photo of it with the cover on and the label showing if you can, so the technician brings the right parts. Every repair carries our six-month guarantee on our repairs. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
The other makes are on brands we work on. Repairs Plus is an independent installer and repairer. We are not the manufacturer.
Fault finder
What is your DTS doing?
Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.
What's it doing?
Likely causes
Gate motor · it's beeping
Most likely first
The mains power to the motor is off, so it's running on its battery. Centurion and Gemini motors give two beeps (or two flashes) in a row; an ET Drive flashes twice and gives a one-second beep every 15 seconds.
The battery is low. Centurion and Gemini motors give three beeps in a row; an ET Drive's status light flashes four times, without a beep.
Something is between the safety beams. A Centurion motor gives a single beep every so often and won't close.
The gate has hit something several times in a row, so the motor has stopped to protect itself. A Centurion keeps beeping until that's cleared.
A holiday lockout or a time setting is blocking the remote: the motor beeps once when you press it and the gate doesn't move.
On a Gemini, four beeps as the motor starts means the manual release lever isn't fully engaged.
Safe checks you can do
When to stop and book
If it keeps beeping with the power on and the beams clear, the battery, charger or controller needs a technician. Don't open the motor: Centurion warns that work by anyone unauthorised may void the manufacturer's warranty.
From the official manuals: Centurion D5-Evo and D10 user guide, ET Drive 500 and 600 user manual, Gemini 24V DC slider manual.
Questions
Questions about DTS
How to reset a DTS gate motor?
Switching it off at the isolator and disconnecting and reconnecting the battery is a safe restart; a full reset clears the limits and often the remotes, so it's best done by a technician who then sets the gate up again and tests it. Read about resetting.
How to program a DTS remote?
Try a new battery in the remote first; if it still won't work, it needs coding to the receiver, which we do on site, or fitting a compatible receiver if the original remotes are no longer available. See DTS remotes.
Where can I find spares for my DTS gate motor?
Batteries and safety beams are standard parts; boards, gears and receivers depend on the model and stock. We source what's available and tell you before any work if a part isn't. See spares.
What is the price of a DTS gate motor in South Africa?
We don't have a current shop price for a new DTS we can stand behind; when a DTS isn't worth repairing we compare it with motors that are easy to buy, such as an ET Drive 500 kit at about R6,260 in shops. See repair or replace.
Book a technician
Get a gate motor quote
Job card
We WhatsApp or call you back. Fields marked (required) are needed.