Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Gate motors · Randburg

Gate motor repairs in Randburg, Centurion and NOVA remotes

A Centurion in Ferndale that won't learn a new remote, a sliding gate in Craighall that judders along its rail, a complex in Bromhof that needs forty remotes coded and three lost ones deleted: we repair and install gate motors across Randburg.

Our promise

Six-month guarantee on our repairs

Our promise

1-year guarantee on every motor kit we supply and install

Randburg

Randburg and the areas around it. Every area we cover

Centurion remotes: coding, deleting and memory

Randburg asks for Centurion motors by name, and Centurion's NOVA remotes use code-hopping: the code changes every time a button is pressed, so a copied signal won't open the gate, and every remote has to be learnt into the receiver that will open it. How that's done depends on the receiver:

  • A D5-Evo or D10 learns remotes through the Remote Controls menu on its own control card. The menu can be locked so it only opens from a remote that's already learnt.
  • A SMART motor learns them through Centurion's phone app.
  • Older Centurion controllers with a plug-in NOVA Voyager receiver learn new remotes from a master remote. If the master is lost, the only way back is to clear the memory and start again.

Every button of a multi-button remote takes its own place in memory, so a full receiver stops learning new ones until places are freed. For a lost or stolen remote, a D5-Evo or D10 can delete it by its memory number without the remote in hand, which is why Centurion advises noting each remote's number and owner when it's learnt. The step-by-step methods are on how to program a Centurion remote.

A technician holding a gate remote beside an open motor receiver board

Sliding gates on Randburg's slopes

Plenty of Randburg stands sit on the slopes of its koppies, and a sliding gate on a slope needs a rail built level and a gate that rolls freely. When it doesn't, the motor strains and the gate stops short, reverses or judders. We find the cause by releasing the motor and running the gate by hand:

  • Wheels and guide rollers worn flat, cracked or seized.
  • A rail that has sunk, lifted or been bent by a car.
  • A rack worn, loose or riding too low on the pinion.
  • Grit and leaves on the rail after rain.

A gate that drags is put right before anything inside the motor is replaced, because a new motor on a stiff gate wears out early.

Gloved hands fitting a steel gear rack along the bottom of a sliding gate, the motor's pinion gear beside it

Gate motor repairs across Randburg

Beyond remotes and rails, these are the other repairs we do:

  • Batteries that no longer carry the gate through load-shedding, tested under load before we replace them.
  • Chargers and power supplies that have stopped charging, often after a surge.
  • Control cards damaged by lightning or a power surge.
  • Safety beams knocked out of line, so the gate refuses to close.
  • Limits that have drifted, so the gate stops short or bumps the end stop.

We work on Centurion's D-series, D5-Evo, D10 and SMART motors, and on ET, Gemini and the other makes we repair. All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. The checks that are safe to do yourself are in the fault finder below.

New gate motors in Randburg

A new motor is matched to the gate's weight and how often it opens, fitted on a base plate with the rack along the gate, and set up with its limits, safety force and remotes. Our sliding gate kits, fitted: the Centurion D5-Evo SMART sliding gate kit at R7 999, the ET Drive 500 sliding gate kit at R6 999 and the Gemini 12 V DC slider kit at R6 999, each for gates up to 500 kg. Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

  • Sliding gate kit

    Centurion D5-Evo SMART sliding gate kit

    R7 999incl. installation

    In the kit

    • D5-Evo SMART motor (gates up to 500 kg)
    • 12 V 7 Ah battery
    • 2 × 4-button NOVA remotes
    • 4 m steel rack
    Our promise

    1-year guarantee on every motor kit we supply and install

  • Sliding gate kit

    ET Drive 500 sliding gate kit

    R6 999incl. installation

    In the kit

    • Drive 500 (gates up to 500 kg)
    • 12 V 7 Ah battery
    • 4 m steel rack
    • 2 × 4-button ET remotes
    Our promise

    1-year guarantee on every motor kit we supply and install

  • Sliding gate kit

    Gemini 12 V DC slider kit

    R6 999incl. installation

    In the kit

    • Gemini DC slider (gates up to 500 kg)
    • 2 × 3-button Gemini remotes
    • 12 V 7 Ah battery
    • 4 m steel rack
    Our promise

    1-year guarantee on every motor kit we supply and install

Prices checked October 2026. Price includes the kit listed, standard installation on a gate or door that already runs freely, and our 1-year kit guarantee. Not included: a power point at the motor if there isn't one (a job for a registered electrician), extra rack, gate or door repairs, and accessories. These are quoted before any work starts.

Compare two kits

SpecCenturion D5-Evo SMART sliding gate kitET Drive 500 sliding gate kit
Price, installedR7 999R6 999
ForSliding gateSliding gate
In the boxD5-Evo SMART motor (gates up to 500 kg)Drive 500 (gates up to 500 kg)
In the box12 V 7 Ah battery12 V 7 Ah battery
In the box2 × 4-button NOVA remotes4 m steel rack
In the box4 m steel rack2 × 4-button ET remotes
Guarantee1-year guarantee on every motor kit we supply and install1-year guarantee on every motor kit we supply and install

Complex gates and remote lists

In a Randburg complex, one gate and one receiver serve every household, and the remote list is where things go wrong: residents leave with their remotes, remotes get lost, and the receiver fills up. We clear out remotes that shouldn't be there, code new ones for every resident, and leave the body corporate a list of which memory number belongs to which unit, so a lost remote can be deleted quickly.

Booking a gate technician in Randburg

Tell us the make and model on the motor's cover, what the gate does, and for remotes, how many you need coded and whether any need deleting. We work across Randburg, from Ferndale, Robindale and Windsor to Craighall, Bordeaux and Boskruin. Same-day repairs fit around the day's bookings in Randburg, and a gate that won't close at night counts as urgent on the job card.

Fault finder

What is your gate doing?

Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.

What's it doing?

Likely causes

Gate motor · it's beeping

Most likely first

  1. The mains power to the motor is off, so it's running on its battery. Centurion and Gemini motors give two beeps (or two flashes) in a row; an ET Drive flashes twice and gives a one-second beep every 15 seconds.

  2. The battery is low. Centurion and Gemini motors give three beeps in a row; an ET Drive's status light flashes four times, without a beep.

  3. Something is between the safety beams. A Centurion motor gives a single beep every so often and won't close.

  4. The gate has hit something several times in a row, so the motor has stopped to protect itself. A Centurion keeps beeping until that's cleared.

  5. A holiday lockout or a time setting is blocking the remote: the motor beeps once when you press it and the gate doesn't move.

  6. On a Gemini, four beeps as the motor starts means the manual release lever isn't fully engaged.

Safe checks you can do

When to stop and book

If it keeps beeping with the power on and the beams clear, the battery, charger or controller needs a technician. Don't open the motor: Centurion warns that work by anyone unauthorised may void the manufacturer's warranty.

Questions

Gate motor questions in Randburg

Can you delete a lost Centurion remote in Randburg?

Yes. On a D5-Evo or D10, a remote can be deleted by its memory number without the remote itself. On older receivers it may mean clearing the memory and coding the remaining remotes again, which we do on the visit. Read about Centurion remotes.

Why won't my Centurion learn a new remote?

The receiver's memory may be full (each button takes a place), the remote menu may be locked, or on an older receiver the master remote is needed. We free space, unlock it or start the memory afresh. Read about remotes and memory.

Do you repair gate motors in Craighall?

Yes, Craighall is part of our Randburg area, with Ferndale, Windsor, Bordeaux and the rest: Centurion and other motors, sliding gates, remotes and batteries. Book a gate technician.

Can you code remotes for a whole complex?

Yes. We clear out remotes that shouldn't be there, code new ones for every resident, and leave a list of which memory number belongs to which unit. Read about complex gates.

Book a technician

Get a gate motor quote in Randburg

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.