Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Electric fences · Bryanston

Electric fence repairs in Bryanston

A fence in Bryanston West with a branch across its top lines, a JVA energiser in Petervale flashing its status light three times, a cluster perimeter in Sharonlea that alarms in every storm: we repair electric fences across Bryanston, and install new ones. 2-year warranty and a compliance certificate on every new electric fence we install.

Our promise

2-year warranty and a compliance certificate on every new electric fence we install

Our promise

Six-month guarantee on our repairs

Bryanston

Bryanston and the areas around it. Every area we cover

Trees and electric fences

Bryanston's older properties were laid out with big gardens and plenty of trees, and an electric fence along a treed boundary has a hard life:

  • Branches across the lines short the fence or make it alarm whenever the wind moves them.
  • Leaves and twigs settle on the insulators and brackets, and arc when they're wet.
  • Roots lift and crack boundary walls, loosening brackets and slackening the wire.
  • Summer growth brings creepers and hedges up to the bottom lines within weeks.

Nemtek's and JVA's manuals both ask owners to keep the fence clear of plants. Keep hedges and branches trimmed well back from the wall. But anything already touching the wires is ours to clear: the fence is live, and a branch lying across it can carry the pulse.

A technician on a ladder holding a fence tester against the strands of an electric fence on a boundary wall

What a JVA energiser's flashing light means

JVA's Z-series energisers report an internal problem by flashing the status light a set number of times. From JVA's manual:

JVA Z-series status light codes, from JVA's manual
FlashesWhat it meansWhat to do
1Tamper: the lid has been openedClose the lid; if it persists, call us
2Mains failureRestore the mains power
3Low or failing batteryHave the battery charged or replaced
4Fault inside the energiserIt needs a repair centre

The keypad helps too: its power light flashes when the battery is running low, and its service light comes on when the energiser develops an internal fault. Minor errors clear themselves once the cause is gone. A tamper or an internal fault is different: it disarms the energiser and sounds both the general and the fence alarms.

If the energiser has stopped pulsing for a moment, JVA's first step is to disarm and re-arm it. If the fault comes back, it's a repair.

A technician shining a torch on the terminals of an open electric fence energiser box in a garage

When the mains fails

A JVA energiser doesn't disarm when the mains fails, and it doesn't disarm for a low battery either. Instead, as the battery runs down, it gives four warning beeps and drops into low power mode to keep the fence going for longer. If the battery keeps falling, it eventually stops. When the mains comes back and the battery has recovered, it re-arms itself, again after four warning beeps.

So a fence that's quiet the morning after a long outage may simply be waiting for its battery to recover. A fence that stays off, or a status light flashing three times once the power is back, means the battery is due for replacement. We test it under load and check the charging before replacing it.

Before you call: four safe checks

A few minutes of looking, without touching anything on the fence, tells us a lot and sometimes saves a visit:

  1. Is the mains on? Check the plug point and the energiser's power light. On a JVA, two flashes of the status light mean the mains has failed.
  2. Count the flashes. Note how many times the status light flashes, and what the keypad's power and service lights are doing.
  3. Are the gates shut? An open gate on a gate contact can be what's alarming.
  4. Walk the boundary at a distance. Look for a branch, a creeper or a fallen wire on the lines, and note where it is.

Put what you found on the job card. If the fence is alarming and you can't find why, switch it off at the keypad and leave the rest to us.

Upgrading an older fence

An older energiser may do little more than click and beep. Worthwhile upgrades, from JVA's range for example:

  • An energiser with a voltage display, such as the Z14, so you can see the fence's condition at a glance.
  • A tamper beam, on the Z14R, Z18 and Z114, which disables the energiser if the lid is taken off.
  • More keypads: a Z14 works with up to three, so there can be one at the door and one by the bedroom.
  • More zones, so an alarm says which side of the property it came from.

Changing the fence itself, such as adding lines or extending it, brings in a new certificate.

Cluster perimeters

Where a Bryanston property has become a cluster development, its perimeter fence usually belongs to the body corporate, not to any one owner. That changes how a fault gets fixed: the trustees or the managing agent book the repair, and the fence's keypad may be at the gatehouse or with one appointed resident. A perimeter split into zones, one per side, makes a cluster's alarms far easier to deal with, because the zone tells the guard or the response company where to look. If yours is one long zone, adding zones is a worthwhile upgrade.

Electric fence repairs in Bryanston

We test the fence zone by zone with a fence tester and repair what we find:

  • Shorts from branches, creepers or wire touching a bracket.
  • Broken or slack wire, joined properly or replaced.
  • Insulators cracked or dirty, arcing in the rain.
  • Gate contacts out of line, so the energiser thinks a closed gate is open.
  • The earth, damaged by digging, paving or roots.
  • Energisers and keypads after a surge, repaired or replaced.
  • Batteries that no longer carry the fence through the night.

All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. Try the safe checks in the fault finder below first, and leave the wires and the inside of the energiser alone.

New fences, and certificates

A new fence starts with a walk along the boundary to plan the lines and zones and to see where the trees are, so the fence can be kept clear of them. It's built to the rules Nemtek and JVA print in their manuals, with warning signs at the gates and along the fence, no barbed or razor wire near the live lines, and gates that open without anyone touching a live wire. Certified electric fence installer, and every new fence is handed over with its certificate.

Selling? A property with an electric fence needs an Electric Fence System Certificate at transfer, and an older certificate may not match a fence that has since been changed. More on electric fence certificates, and on the process on electric fence installation.

Typical electric fence repair prices

Typical market prices in Gauteng, from cost guides and shop listings, not ours:

  • Simple repairs (insulators, a broken wire) including call-out: R700–R1 400 (Kandua)
  • Complex faults or a new energiser: R1 500–R5 000+ (Kandua)
  • Gate contact: R450–R900 (Kandua)
  • JVA Z11 (1 zone), in shops: about R3 070 (Takealot)
  • 12 V 7 Ah battery, in shops: R230–R450 (Takealot)

Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Booking a fence technician in Bryanston

On the job card, tell us the energiser's make, what its lights are doing and how many flashes, and whether trees are involved. We work across Bryanston, from Bryanston East and Bryanston West to Sharonlea, Bryanbrink and Petervale. Same-day repairs are on offer when the day's bookings allow, and a fence that has had to be switched off is treated as urgent.

Fault finder

What is your fence doing?

Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.

What's it doing?

Likely causes

Electric fence · the alarm keeps going off

Most likely first

  1. The fence voltage has dropped below the alarm level: something is touching the wires, or plants have grown into the fence.

  2. The gate input is open: the gate isn't fully closed.

  3. The fence condition is poor: dirty or failed insulators, or wet insulators after rain.

Safe checks you can do

When to stop and book

Never touch the fence wires or open the energiser. If the alarm won't clear, we'll find the fault on the fence.

Questions

Electric fence questions in Bryanston

Why is my JVA energiser's light flashing three times?

JVA's code for a low or failing battery. Have the battery tested and charged or replaced; if the mains is off, it may also just need the power back and time to recover. Read the JVA codes.

Does a JVA electric fence switch off in a power cut?

No. It keeps running and, as the battery runs down, gives four warning beeps and drops to low power. If the battery runs flat it stops, and re-arms itself once the mains and battery recover. Read about power cuts.

Can I cut a branch that's touching my electric fence?

Keep trees trimmed well back from the fence, but leave anything already touching the wires to us: the fence is live. Read about trees and fences.

Who repairs a cluster's perimeter electric fence?

Usually the body corporate books it, through the trustees or managing agent, because the perimeter is shared. We work with them directly. Read about cluster perimeters.

Book a technician

Get an electric fence quote in Bryanston

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.