Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Electric fences · Douglasdale

Electric fence repairs in Douglasdale, and getting more from your keypad

A complex perimeter near Jukskei Park that alarms every night, a family home near Magaliessig wanting a chime when the gate opens, a keypad nobody knows how to read: we repair and install electric fences across Douglasdale. 2-year warranty and a compliance certificate on every new electric fence we install.

Our promise

2-year warranty and a compliance certificate on every new electric fence we install

Our promise

Six-month guarantee on our repairs

Douglasdale

Douglasdale and the areas around it. Every area we cover

Complex perimeters

In Douglasdale's townhouse complexes, the electric fence runs along the perimeter wall, divided into zones, with an energiser in a service room and a keypad at the guardhouse or the main gate. It belongs to the body corporate, so repairs and upgrades go through the trustees or the managing agent.

Nemtek's Druid energisers have two kinds of user, and that suits a complex well. The master user can switch the fence on and off and change settings; the reset user can silence an alarm and clear it, but can't switch the fence off. So the master PIN can stay with the trustees or the managing agent, and whoever is on duty at the gate can deal with an alarm without being able to disarm the fence.

A technician on a ladder holding a fence tester against the strands of an electric fence on a boundary wall

Changing the PINs when people move on

Trustees change, managing agents change, and guards come and go, so a complex's PINs should change with them. On a Druid, only the master user can change a PIN, for either user, and it takes three entries in a row:

  1. The master PIN, then *0, then 1 for the master PIN or 2 for the reset PIN, then #.
  2. The new four-digit PIN, then #.
  3. The same new PIN again, then #.

Two beeps mean the new PIN has been taken. A single long beep means it failed, and you start again from the first step. If you know you mistyped the new PIN the second time, Nemtek's manual says you can simply key it in correctly a third time and listen for the beeps. Each entry has to be keyed without a long pause, because the keypad drops what you've typed if you stop for more than five seconds.

Then try the new master PIN straight away: keyed in with # on its own, it switches the fence off, and keyed in again it switches the fence back on. Write the new PINs down somewhere safe that the trustees can reach. A master PIN that nobody remembers means the fence can't be switched off for maintenance, and getting back in needs a technician.

Reading your fence's health on the keypad

A Druid keypad can tell you a great deal about your fence, and these displays need no PIN, because they change nothing. From Nemtek's manual:

Druid information displays, from Nemtek's user manual
Key inWhat it shows
60#GOOD, CHECK or BAD, the everyday display
61#The voltage going out to the fence and coming back, in kV
62#The stored energy, and how hard the energiser is working, as a percentage
63#How much voltage is lost along the fence, as a percentage
64#The battery's voltage

Two readings are worth watching. How hard the energiser is working rises as the fence gets bigger or more loaded, by plants, a cracked insulator or a wire on a bracket, and it can't go past 100%. And the voltage lost along the fence grows as the fence develops faults. Note the readings on a day when the fence is in good order, and you have something to compare against when it isn't.

Gate functions: chime, instant alarm and bypass

If your gate is wired to the energiser, the keypad can do more with it than most owners know. Each of these is your master PIN followed by the code:

  • Gate chime, *51#: the keypad beeps three times the moment the gate opens, while the gate alarm carries on as before. Switch it off with *50#.
  • Instant gate alarm, *71#: the alarm sounds as soon as the gate opens, without waiting out the gate delay. Back to the delay with *70#.
  • Gate alarm bypass, *41#: the gate can stand open without the alarm sounding, for a party or a delivery. Switch it back on with *40#, and don't forget to.
A hand entering a code on a steel keypad pedestal beside a driveway gate

Low power, silent testing and panic

  • Low power (master PIN, then *31#) turns the fence down to a level that's far less painful to touch, which Nemtek suggests for when children are playing near it. *30# puts it back to full power, and a "lo" symbol shows while it's down.
  • Silent alarm (master PIN, then *81#) stops the siren and strobe from going off, while the keypad's own beeper still sounds. It's meant for testing the fence without alarming the street; *80# switches the siren back on.
  • Panic alarm is simply 91#, with no PIN, so anyone at the keypad can raise the alarm in an emergency.

Bypasses, and why to use them sparingly

The keypad can also bypass the fence alarm, so a fence fault doesn't sound, and bypass the service alarm. Nemtek's own manual says you would typically not want to bypass the fence alarm, and it's right: a bypassed alarm is a fence that can be cut in silence. While a bypass is on, a symbol shows on the keypad and the energiser, so check for it if your fence ever seems to have gone quiet.

A service warning can appear for a short while after a long power cut and clear by itself. If it stays, the battery may need replacing or something else needs servicing. If your installer has programmed their number into the energiser, the display shows it during a service condition.

Electric fence repairs in Douglasdale

We repair Nemtek and JVA energisers and keypads, and the fences themselves: broken wires, cracked insulators, loose brackets, earth spikes, gate switches, sirens and strobes, on homes and complex perimeters alike. All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. The checks that are safe to try first, without touching the wires, are in the fault finder below.

New fences and certificates

A new fence, or a new energiser and keypad on an old one, is planned with you or the trustees on site, built to the rules Nemtek and JVA print in their manuals, tested along every zone, and handed over with its certificate, along with a walk through the keypad's functions. Certified electric fence installer. If you only need the certificate for a sale, see electric fence certificates.

Typical electric fence prices

Market prices in Gauteng, from installer price lists and cost guides, not ours:

  • 8-line wall-top fence, installed: R115–R125 a metre (published price lists of Gauteng installers)
  • Simple repairs (insulators, a broken wire) including call-out: R700–R1 400 (Kandua)
  • Energiser repair: R800–R2 500 (Kandua)
  • Inspection and certificate for a fence that already complies: R850–R1 500 (Kandua, Completo)

Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Booking a fence technician in Douglasdale

On the job card, give the energiser's make, what the keypad shows, and what the fence is doing; for a complex, add who will meet us and where the energiser is kept. We work throughout Douglasdale, from Epsom Downs and Magaliessig to the complexes by Maroeladal, Jukskei Park and Cowdray Park. Same-day repairs are offered when the day allows, and a perimeter that's down at night is treated as urgent.

Fault finder

What is your fence doing?

Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.

What's it doing?

Likely causes

Electric fence · the alarm keeps going off

Most likely first

  1. The fence voltage has dropped below the alarm level: something is touching the wires, or plants have grown into the fence.

  2. The gate input is open: the gate isn't fully closed.

  3. The fence condition is poor: dirty or failed insulators, or wet insulators after rain.

Safe checks you can do

When to stop and book

Never touch the fence wires or open the energiser. If the alarm won't clear, we'll find the fault on the fence.

Questions

Electric fence questions in Douglasdale

How can I check my electric fence's voltage on a Nemtek keypad?

On a Druid, key in 61# to see the voltage going out and coming back in kV. No PIN is needed, because it changes nothing. Read about the readings.

Can my electric fence beep when the gate opens?

On a Druid, yes: your master PIN followed by *51# turns on the gate chime, three beeps the moment the gate opens. *50# turns it off. Read about gate functions.

Can I turn my electric fence down when children are playing?

Yes: on a Druid, your master PIN followed by *31# switches to low power, far less painful to touch, and *30# brings it back to full power. Read about low power.

How do I raise a panic alarm on a Nemtek keypad?

Key in 91#. No PIN is needed, so anyone at the keypad can raise the alarm in an emergency. Read about the panic alarm.

Book a technician

Get an electric fence quote in Douglasdale

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.