Palisade and ClearVu · Kempton Park
Palisade fencing and ClearVu in Kempton Park
We supply and install ClearVu-type high-security mesh, steel palisade and weld mesh across Kempton Park, from a townhouse perimeter in Van Riebeeck Park to a warehouse fence in Spartan, with gates made to match. Fences that have been hit, cut or rusted are repaired in the same profile.
Six-month guarantee on our repairs
Kempton Park and the areas around it. Every area we cover
ClearVu-type mesh in Kempton Park
ClearVu-type mesh is the fence most people in Kempton Park ask us about, and with good reason. It is built from rigid steel panels welded into a very fine grid, with openings too small for fingers or the toe of a shoe, so there is nothing to grip when climbing and little room for a cutting tool. Seen from the street it looks almost transparent.
That combination suits the town:
- Complexes and estates, where a guard patrolling the perimeter needs to see the whole fence line and residents don't want to live behind a wall.
- Warehouses and logistics yards near the airport, where the stock is valuable and the fence has to be hard to breach without hiding what's going on behind it.
- Family homes that want a secure front without a caged look.
The panels are clamped to the posts with fixings that can't be undone from outside, and an electric fence can run along the top. Typical installed figures for ClearVu-type mesh are R1 300–R1 600 a metre (ProCompare); R1 200–R1 700 a metre (Completo), and one clearvu-type panel kit (1.8 × 2.5 m) costs about R4 600 (Takealot) in shops. Prices checked October 2026.

Steel palisade, and where it still wins
Steel palisade, upright pales bolted to rails between concrete-set posts, is the stronger choice where a vehicle could be driven at the fence or a heavy gate has to hang from it. It is also the cheaper choice per metre at lower heights, and it says "keep out" at a glance.
On a Kempton Park property we usually suggest palisade for:
- the street front of a house where the driveway gate is the main entrance;
- the vehicle entrance of a yard, where trucks turn close to the fence;
- any stretch where a ClearVu-type panel would be exposed to knocks.
The pales can have pointed, split or rounded tops, and the whole fence is galvanised or painted against rust.

Weld mesh for the long sides
Weld mesh is the lightest of the three: a grid of welded wire in rolls or panels, tensioned between posts. It follows a slope without stepping, goes up quickly and costs the least per metre, which makes it the sensible choice for side and back boundaries, the semi-rural plots to the north-east of town, sports fields and garden areas. Typical installed figures are R600–R800 a metre (ProCompare), and a galvanised welded mesh roll (1.8 × 30 m, 50 × 50 × 2 mm) is about R4 880 (Takealot) in shops. Prices checked October 2026.
Fences across Kempton Park
Kempton Park began in 1903 as 216 residential stands laid out on part of the farm Zuurfontein, and it has grown into a town of 171 575 people (2011 Census) across 149 km², with O. R. Tambo International Airport inside its boundary. That mix shapes the fences we put up:
- Older suburbs such as Kempton Park West, Esther Park and Cresslawn, where street fronts are being upgraded from low walls to palisade or ClearVu-type mesh.
- Van Riebeeck Park and Terenure, with their townhouse complexes and family homes.
- Spartan and the industrial areas towards the airport, where yards want high fences and wide gates.
- The area around Kelvin Power Station and Kempton Park Hospital, where business and residential boundaries meet.
Everything else we do in town is on Kempton Park.
Gates and repairs
Driveway and pedestrian gates are made in the same profile as the fence and hung on posts heavy enough for them; a sliding gate can be motorised now or later. A steel pedestrian gate is typically R2 500–R6 000 (Completo) installed (Prices checked October 2026).
For an existing fence, we replace bent or cut pales and panels, reset posts that have moved and treat rust before it spreads. Every repair carries our six-month guarantee on our repairs. A motor for the gate is on gate motor repairs in Kempton Park.
Typical prices per metre
- Steel palisade (all heights): R1 100–R2 400 a metre (ProCompare); R1 200–R2 500 a metre (Completo)
- Steel palisade with pillars: R3 100–R3 800 a metre (ProCompare)
- ClearVu-type high-security mesh: R1 300–R1 600 a metre (ProCompare); R1 200–R1 700 a metre (Completo)
- Labour only, palisade: R250–R700 a metre (Kandua)
These are the market's installed figures, not ours. Prices checked October 2026. More detail is on palisade fencing prices. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Booking a fencing quote
We measure on site, look at the ground and the neighbours' walls, and give you a written quote with the fence type, height, gates and a date. Photos of the boundary sent with your booking help us arrive with the right questions. Free quote: no call-out fee when we do the work. If no work is done, a R650 call-out fee applies. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Questions
Fencing questions from Kempton Park
Where can I get ClearVu fencing installed in Kempton Park?
Book us on this page: we measure the boundary, quote for ClearVu-type mesh panels and posts, the gates and any electric fence on top, and install it. Read about ClearVu-type mesh.
Is ClearVu stronger than palisade?
They are strong in different ways. ClearVu-type mesh is much harder to climb and cut; palisade stands up better to a vehicle and a heavy gate. Many properties use palisade at the entrance and ClearVu-type mesh along the rest. Compare them.
Can a ClearVu fence be put on top of a wall?
Yes, shorter panels can be bolted to the top of a sound wall to add height without building it up. We look at the wall first, because the fixings need solid brick or concrete to hold. Get a quote.
Can you match new fencing to my existing palisade?
Usually, yes: we measure the pale spacing, the rail positions and the top profile and make the new section to match, then paint the whole run so it reads as one fence. See gates and repairs.
Book a technician
Get a palisade fencing quote in East Rand
Job card
We WhatsApp or call you back. Fields marked (required) are needed.