Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Palisade fencing · Germiston

Palisade fencing in Germiston for industry and homes

Germiston works for a living, and its fences take a beating: forklifts, trucks reversing to a loading bay, cut pales on a quiet weekend. We supply, install and repair steel palisade, ClearVu-type mesh and weld mesh across Germiston, for factories and yards as well as homes, with gates built to take the traffic.

Our promise

Six-month guarantee on our repairs

Germiston and the areas around it. Every area we cover

Fencing factories, depots and yards

Germiston is one of the country's biggest manufacturing, trucking and railway centres, and a steel town besides, so most of the palisade we're asked about here goes round business premises. An industrial boundary asks more of a fence than a house does:

  • Height, usually 2.4 m or more, so the fence can't be stepped over from a parked vehicle.
  • Heavier pales and rails, and posts set deeper in concrete, so a knock from a truck bends one section instead of flattening a run.
  • Wide gates for articulated trucks, with a separate pedestrian gate for staff so the main gate isn't opened all day.
  • An anti-climb top, either spikes on the pales or a strand of electric fence on brackets.
  • Space at the loading area, where we keep the fence clear of the turning circle rather than repairing it every month.

Where a yard stores valuable stock, ClearVu-type mesh along the boundary adds a fence that is very hard to climb or cut while leaving the yard visible to the guard and the cameras.

A new black steel palisade fence and sliding gate along a suburban property

Fencing homes in Germiston

Germiston's residential suburbs, from the streets near Germiston High School and the lake to the homes towards Rand Airport, mostly want a secure street front with a driveway gate and a pedestrian gate. The choices:

  • Palisade where the fence has to look strong and stand up to a car.
  • ClearVu-type mesh where you want security without hiding the garden.
  • Weld mesh along the sides and back, where it keeps the cost down.

We build the fence between existing pillars where they're sound, or set new posts where they aren't, and match the gate to the fence so the front reads as one piece.

Technicians installing tall mesh security fence panels along a boundary

Repairs that keep a boundary closed

On a business boundary, a gap in the fence is a gap in the insurance, so repairs come first. What we fix most in Germiston:

  1. Sections hit by vehicles: bent pales and rails cut out and replaced in the same profile, and posts reset in new concrete.
  2. Cut pales: replaced, with the cut ends welded so the gap can't be reopened with the same tool.
  3. Gates that drag or won't latch: hinges and rollers replaced, the gate re-hung and the frame straightened.
  4. Rust at ground level: ground back, primed and painted before it weakens the pales.

Where the same stretch keeps being hit, we suggest a bollard or a kerb in front of it rather than another repair. Every repair carries our six-month guarantee on our repairs.

Fences across Germiston

The 2011 Census counted 255 863 people in Germiston's 143 km². The town grew around the gold found here in 1886 and the Rand Refinery, and it is still a place of works, depots and rail spurs. We put fences up from the industrial suburbs to the residential streets near Germiston Stadium and St Boniface Church, and we come to sites where security has to be fixed before the shift ends.

For gate motors, garage doors and electric fences in town, see Germiston.

What palisade costs per metre

  • Steel palisade 1.8 m: R1 800–R2 200 a metre (Kandua); R1 980–R2 420 a metre (LocalPros)
  • Steel palisade 2.4 m: R2 000–R3 000 a metre (Kandua)
  • Steel palisade with pillars: R3 100–R3 800 a metre (ProCompare)
  • ClearVu-type high-security mesh: R1 300–R1 600 a metre (ProCompare); R1 200–R1 700 a metre (Completo)
  • Steel pedestrian gate: R2 500–R6 000 (Completo)

These are the market's installed figures, not ours. Prices checked October 2026. An industrial fence is priced on its length, height, gates and ground, so the quote is what counts. The full list is on palisade fencing prices. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Getting a quote for a Germiston site

We come out to measure, walk the boundary with you or your site manager, and note the vehicle routes, the gates and anything in the way. For a business, tell us the opening hours and who to ask for at the gate. Free quote: no call-out fee when we do the work. If no work is done, a R650 call-out fee applies. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Questions

Palisade fencing questions in Germiston

What height of palisade does a factory need?

Usually 2.4 m or more, so the fence can't be stepped over from a vehicle parked against it, with an anti-climb top. We look at what's stored, where the vehicles turn and what the insurer asks for before we quote. Read about industrial fencing.

How quickly can you repair a fence that has been hit?

We come out as soon as we can and make the boundary safe first, then replace the damaged pales, rails and posts in the same profile. See repairs.

Do you make gates wide enough for trucks?

Yes: double swing or sliding gates sized to the vehicles that use them, hung on heavy posts, with a separate pedestrian gate for staff. A sliding gate can be motorised. Read about industrial fencing.

Should a business use palisade or ClearVu?

Palisade stands up better to vehicles and costs less per metre; ClearVu-type mesh is harder to climb and cut and keeps the yard visible to guards and cameras. Many sites use palisade at the gates and ClearVu-type mesh around the stock. Compare the costs.

Book a technician

Get a palisade fencing quote in East Rand

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.