Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Palisade fencing · Boksburg

Palisade fencing in Boksburg, with ClearVu-type mesh

We measure, supply and install steel palisade fencing across Boksburg, from a house front near Boksburg Lake to a factory boundary off the N3, along with see-through ClearVu-type mesh, weld mesh and gates made to match. We also straighten, weld and re-paint fences that have been hit, cut or left to rust.

Our promise

Six-month guarantee on our repairs

Boksburg and the areas around it. Every area we cover

Palisade, ClearVu-type mesh or weld mesh?

The three steel fences do different jobs, and plenty of Boksburg properties use two of them:

  • Steel palisade: vertical pales with pointed or split tops, bolted to horizontal rails between posts set in concrete. It is the strongest of the three and looks it, which is the point on a street front or a yard entrance.
  • ClearVu-type high-security mesh: rigid welded panels with openings too small for fingers or the toe of a shoe, so there is nothing to climb on and little to cut. From a few metres away it almost disappears, which suits homes and complexes that don't want to look caged.
  • Weld mesh: a lighter grid of welded wire, sold in rolls or panels. It follows uneven ground and costs the least per metre, so it suits back and side boundaries where the risk is lower.

A pattern that works on many Boksburg plots: palisade or ClearVu-type mesh where the property faces the road, and weld mesh along the less exposed sides. Each kind is explained in more depth on steel palisade fencing.

A new black steel palisade fence and sliding gate along a suburban property

Clear view fencing in Boksburg

"Clear view" fencing is the name most people use for ClearVu-type high-security mesh, and it is the fence we're asked about most for complexes and newer homes. What makes it hard to beat:

  • The openings are tiny, so a hand, a foot or a pry bar gets no purchase.
  • The panels are rigid and welded, so cutting a hole big enough to climb through takes time and noise.
  • You can see through it, so a patrol, a neighbour or a camera can see who is at the fence, and nobody can hide behind it.

Panels come in standard heights and are bolted to posts with clamps that can't be undone from the outside. Typical installed figures for this kind of mesh are R1 300–R1 600 a metre (ProCompare); R1 200–R1 700 a metre (Completo), and a single clearvu-type panel kit (1.8 × 2.5 m) is about R4 600 (Takealot) in shops. Prices checked October 2026.

Fencing homes, complexes and factories in Boksburg

Boksburg is a big place: the 2011 Census counted 260 321 people across 162 km², and its boundaries vary as much as its streets.

Homes in the older suburbs around the town centre usually fence the street front between brick pillars, with a driveway gate and a pedestrian gate in the same style. The main decision is height: a low fence marks the boundary, while one at head height or above is meant to stop someone coming over.

Complexes and townhouse estates suit ClearVu-type mesh on the perimeter, often with an electric fence along the top, so the guards on patrol can see the whole boundary.

Factories and yards in the town's industrial areas want palisade at the street, gates wide enough for trucks, and posts set deep enough to take a knock from a reversing vehicle.

Homes in Reiger Park, Dawn Park and towards Vosloorus often start with a palisade street front and add the sides later, which works well as long as the first section is built to the same height and profile.

Technicians installing tall mesh security fence panels along a boundary

Gates that match the fence

A fence is only as good as its gate, so we make the driveway and pedestrian gates in the same profile as the fence and hang them on posts strong enough to carry them. Sliding driveway gates can be motorised later, and we leave the track and the motor plinth ready if you ask. A steel pedestrian gate is typically R2 500–R6 000 (Completo) installed. Prices checked October 2026. For a motor, see gate motor repairs in Boksburg.

Repairing a damaged palisade fence

Most palisade repairs we see in Boksburg are one of four things:

  1. Bent pales or rails from a car or a truck. We cut out the damaged section and weld or bolt in new steel of the same profile.
  2. Pales cut out to get through. We replace them and, where it keeps happening, add anti-climb spikes or a strand of electric fence along the top.
  3. A post loose in its footing, usually where water has stood around it. We dig it out and set it again in fresh concrete.
  4. Rust, worst at the bottom of the pales where they meet damp soil. We grind it back, prime it and paint it before it eats through.

Every repair carries our six-month guarantee on our repairs.

What palisade fencing typically costs

Installed prices per metre in the South African market:

  • Steel palisade 1.2 m: R900–R1 500 a metre (Kandua)
  • Steel palisade 1.8 m: R1 800–R2 200 a metre (Kandua); R1 980–R2 420 a metre (LocalPros)
  • Steel palisade 2.4 m: R2 000–R3 000 a metre (Kandua)
  • Weld mesh: R600–R800 a metre (ProCompare)

These are the market's figures, not ours. Prices checked October 2026. The full breakdown is on palisade fencing prices. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Getting a quote in Boksburg

We come out, walk the boundary with you, measure it and talk through heights, gates and the ground the fence will stand on. Send a few photos of the boundary with your booking if you can, and mention anything unusual, such as a slope, a neighbour's wall or a stormwater channel. Free quote: no call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

If you're near Tambo Memorial Hospital or anywhere else in town, everything else we do in Boksburg is on Boksburg. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Questions

Palisade fencing questions from Boksburg

Is clear view fencing better than palisade in Boksburg?

It depends on the boundary. ClearVu-type mesh is harder to climb and cut and you can see through it, which suits homes and complexes; palisade is stronger against a vehicle and cheaper per metre at lower heights, which suits street fronts and yards. Compare them.

Can you fix a palisade fence that a car has hit?

Yes: we cut out the bent pales and rails, weld or bolt in new steel of the same profile, reset any post that has moved in its footing and paint the repair to match. Read about repairs.

Can I add an electric fence to my palisade?

Yes, palisade and ClearVu-type mesh both take an electric fence on brackets along the top. We plan the height so the two work together, and every new electric fence comes with its certificate. See electric fence repairs in Boksburg.

How long does it take to put up a palisade fence?

A house street front is usually a matter of days once the steel is made, because the posts need their concrete to set before the panels go on. A long factory boundary takes longer; we give you a date with the quote. Get a quote.

Book a technician

Get a palisade fencing quote in East Rand

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.