Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Electric fences · Alberton

Electric fence repairs in Alberton, from homes to Alrode

A wall-top fence in Brackendowns that alarms every evening, a long freestanding perimeter around a yard in Alrode with a fault nobody can find, a new fence for a house in Meyersdal: we repair and install electric fences across Alberton. 2-year warranty and a compliance certificate on every new electric fence we install.

Our promise

2-year warranty and a compliance certificate on every new electric fence we install

Our promise

Six-month guarantee on our repairs

Alberton

Alberton and the areas around it. Every area we cover

Fences on Alberton homes

On a house, an electric fence is usually wall-top: brackets along the boundary wall holding six to twelve lines above it, an energiser in the garage or a cupboard, and a keypad by the door. The faults we find on them are the familiar ones, and a fence tester tells us which zone and which stretch to look at:

  • Plants and creepers reaching the bottom lines.
  • Broken or slack wire, often where a bracket has worked loose on an old wall.
  • Cracked insulators, which leak and arc in the rain.
  • Gate contacts out of line, so a closed gate reads as open.
  • The battery, past its best after several years of power cuts.
  • The energiser or keypad after a surge.
A technician on a ladder holding a fence tester against the strands of an electric fence on a boundary wall

Industrial perimeters in Alrode

An industrial fence is a different job. Around a factory, a warehouse or a yard in Alrode, the fence is often freestanding, many lines high, and hundreds of metres long. A fault or a breach on a fence like that is hard to find if all the system can say is that the fence is alarming. The answer is to divide it, so the alarm says where: either into zones, each with its own energiser output, or into monitored sectors on fewer energisers. JVA makes equipment for both. Industrial electric fences also often stand just inside palisade or mesh, so the steel and the live lines have to be planned together: posts strong enough for the brackets, the steel earthed, and the lines held clear of it.

A new black steel palisade fence and sliding gate along a suburban property

Finding the fault: sectors on a JVA ZM20

JVA's ZM20 works with an energiser to watch a long fence in up to 20 sectors, and its bigger sibling, the ZM50, up to 50. When the fence is breached or develops a fault, it reports which sector, or how far along the fence as a percentage of its length, so a guard can go straight there or a camera can be turned towards it. From JVA's manual:

  • The sectors are taught at installation, by deliberately shorting the fence at each join between sectors so the monitor learns where they are.
  • It feeds the fence from both ends, so if a wire is cut, both sides of the cut stay live.
  • It watches the fence's health through the power flowing in it, so a change can point to a fault.
  • One energiser and monitor can report many sectors, which JVA points out can cost far less than an energiser for every zone.

On a site run from a control room, JVA's Perimeter Patrol software can show the fence on a screen and pass alarms on to other security systems.

Splitting a zone without another energiser

Where an existing fence has one long zone, JVA's ZLM4 offers a way to divide it. It's a low-voltage monitor that runs on the fence's earth wires, the ones that aren't energised, in up to four loops of several hundred metres each. It raises an alarm when a loop is cut, when it's shorted to the ground, when it touches a live wire, or when two loops touch each other. So one high-voltage zone can report as four, and the whole group, energisers and monitor, can be run from one keypad.

Keeping an industrial fence working

A long perimeter fails a little at a time, so on industrial sites we suggest regular inspections rather than waiting for the alarm that nobody can trace:

  • A clear strip along the fence, cut back so grass and bush never reach the lowest lines.
  • The earth system checked, since earth spikes and wires get damaged by vehicles, digging and corrosion.
  • Each zone or sector tested with a fence tester, so a weak stretch is found before it fails.
  • Insulators and joins inspected, and cracked or burnt ones replaced.
  • Batteries tested under load, because a perimeter that drops out in a power cut is no perimeter at night.

We agree the visits around the site's working hours, and leave a short report of what was found and fixed.

Living with a home fence

At home, the upkeep is simpler. Keep hedges and creepers trimmed back from the wall, look along the lines now and then for a strand that has dropped or come off a bracket, and have the battery tested twice a year, as Nemtek advises. Know your own keypad code and how to switch the fence off, so a garden service or a painter can work safely near it. And if the fence is linked to your armed response, tell them when you'll have it switched off for work, so a deliberate shutdown isn't treated as a break-in.

Nemtek, JVA and other makes

The energisers we repair, install and replace are Nemtek's and JVA's. If yours is another make, Stafix for example, send us the model on the job card: we'll tell you honestly whether we can help with it, or price a Nemtek or JVA replacement that fits your fence. Nemtek's and JVA's ranges are compared on our energiser page.

A technician shining a torch on the terminals of an open electric fence energiser box in a garage

New electric fences in Alberton

A new fence starts with the boundary: its length, whether it's a wall-top fence or freestanding, how many lines it needs, how it should be divided, and where the energiser, keypad and earth go. It's built to the rules Nemtek and JVA print in their manuals: warning signs at the gates and along the fence, no barbed or razor wire near the live lines, and gates that open without anyone touching a live wire. Certified electric fence installer, and the fence is handed over with its certificate. More on electric fence installation, and on electric fence certificates for a sale.

Electric fence repairs across Alberton

We test zone by zone, find the fault and fix it, from a single cracked insulator to a stretch of fence brought down by a vehicle. All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. Before you book, the fault finder below has the checks that are safe to do from a distance; leave the wires and the inside of the energiser to us.

Typical electric fence prices

Market prices in Gauteng, from installer price lists and cost guides, not ours:

  • 8-line wall-top fence, installed: R115–R125 a metre (published price lists of Gauteng installers)
  • 24-line freestanding fence, installed: R275–R295 a metre (published price lists of Gauteng installers)
  • Freestanding, installed: R215–R400 a metre (Kandua)
  • Fault-finding call-out: R500–R900 (Kandua)
  • Energiser repair: R800–R2 500 (Kandua)

Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Booking a fence technician in Alberton

On the job card, give the energiser's make and what its lights or display show, and for an industrial site, the fence's rough length and who to meet at the gate. We work across Alberton, from Alberton North, Raceview and Randhart to Brackenhurst, Brackendowns, Meyersdal and Alrode. Same-day repairs can be booked when the day's bookings allow, and a fence that has had to be switched off is treated as urgent.

Fault finder

What is your fence doing?

Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.

What's it doing?

Likely causes

Electric fence · the alarm keeps going off

Most likely first

  1. The fence voltage has dropped below the alarm level: something is touching the wires, or plants have grown into the fence.

  2. The gate input is open: the gate isn't fully closed.

  3. The fence condition is poor: dirty or failed insulators, or wet insulators after rain.

Safe checks you can do

When to stop and book

Never touch the fence wires or open the energiser. If the alarm won't clear, we'll find the fault on the fence.

Questions

Electric fence questions in Alberton

How do you find a fault on a long industrial electric fence?

By dividing it, into zones or into monitored sectors. JVA's ZM20 reports which of up to 20 sectors has the fault, or how far along the fence it is. Read about sectors.

Can one electric fence zone be split without adding an energiser?

Yes, with JVA's ZLM4, which monitors up to four low-voltage loops on the fence's earth wires, so one zone reports as four. Read about the ZLM4.

Do you repair Stafix energisers in Alberton?

The makes we repair and install are Nemtek and JVA. Send us the model of any other make and we'll tell you honestly whether we can help, or price a replacement. Read about makes.

Why does my fence keep alarming in the evening?

Often plants touching the bottom lines, a gate contact out of line, or insulators leaking as the dew settles. We test zone by zone to find it. Read about home fences.

Book a technician

Get an electric fence quote in Alberton

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.