Electric fencing · Alarms
Electric fence alarm systems: how they work, why they go off, and repairs
An electric fence is two things at once: a barrier that shocks, and an alarm that tells you when someone touches, cuts or shorts it. When the alarm side works, you know about an attack before anyone reaches the house; when it doesn't, you get sirens at 3 am for a branch on the wire. Here's how the alarm works, how it links to your house alarm and armed response, and what we do when it misbehaves.
2-year warranty and a compliance certificate on every new electric fence we install
24/7 emergency repairs across Gauteng

How an electric fence alarm works
The energiser sends a short, high-voltage pulse along the fence wires about once a second, and it watches what comes back. Because the fence is a closed loop, the energiser can tell when something has changed:
- A cut wire breaks the loop, so the pulse doesn't return.
- A short, a wire touching the earth wire, a fallen branch or a metal object bridging the strands, drains the pulse to earth.
- A gradual drop in voltage, from plants touching the wires, dirty insulators or a weak earth, which the energiser compares against a level it's been set to accept.
- A tamper: the energiser's box being opened, or a gate contact opening on a gate that's meant to stay shut.
When one of these happens, the energiser sounds its siren or strobe, shows the fault on its display or keypad and, if it's linked, tells your house alarm or the armed response company.

Zones, keypads and sirens
Zones split the fence into sections the energiser monitors separately: the front, each side, the back. A zone tells you where the alarm came from, so you or the guard know which side to check, and a fault on one zone doesn't have to silence the others. Larger properties and complexes benefit most.
Keypads let you arm and disarm the fence, see which zone is in alarm and silence the siren with a code, from inside the house rather than at the energiser. Nemtek's Merlin keypad is one example, described on its manual page.
Sirens and strobes are mounted where they'll be heard and seen. A strobe helps the armed response officer find the property at night; a siren tells everyone nearby that something has happened.
Linking the fence to your house alarm and armed response
Most energisers have an alarm output that can be wired into a house alarm panel as an extra zone. Once it's linked:
- a fence alarm is sent through the house alarm's communicator to the armed response company, so someone is dispatched even when you're out;
- the house alarm can arm and disarm the fence along with the rest of the system;
- the control room sees "fence" as a separate zone and knows where to look.
We wire the fence's output to the alarm panel, and work with your alarm company to programme the zone on their side. Many armed response companies also ask for a fence to be in good order, without frequent false alarms, before they'll respond to it.
Why it goes off by itself
False alarms are the fence-alarm problem we hear about most, and nearly all of them have a physical cause on the fence:
- Plants growing into the wires, worst after rain when the leaves are wet.
- Snails and insects on the insulators at night, which leak current.
- A loose or broken wire that touches its neighbour in the wind.
- Corroded joints and earth spikes, which raise the fence's resistance until a small change tips it into alarm.
- A gate contact that has worn and opens when the wind moves the gate.
- A failing backup battery, which can make the energiser report power faults during load shedding.
Our electric fence alarm keeps going off guide walks through the safe checks. Raising the alarm threshold to stop the noise isn't a fix: it hides the fault and weakens the fence.
Silencing and resetting the alarm
How you silence and reset an alarm depends on the energiser and keypad, so follow the manual for yours. In general:
- Silence the siren with your code on the keypad, or by arming and disarming at the energiser.
- Read the display or the zone lights to see what caused the alarm and where.
- Check that zone safely from a distance: look for a branch, a fallen wire or an open gate. Don't touch the wires, and don't open the energiser: it carries mains power and stores a dangerous charge.
- Re-arm the fence once the cause is cleared. If it alarms again straight away, the fault is still there.
The Nemtek and JVA manual pages, Nemtek Druid and JVA energisers, explain the lights and codes for those models.
Fence alarm repairs
We find and fix the cause, not just the noise: we test the fence zone by zone, repair wires, joints, insulators and gate contacts, replace a worn earth system or backup battery, and repair or replace the energiser, keypad or siren. Typical figures in the market:
- Simple repairs (insulators, a broken wire) including call-out: R700–R1 400 (Kandua)
- Gate contact: R450–R900 (Kandua)
- Energiser repair: R800–R2 500 (Kandua)
These are not our prices. Prices checked October 2026. Every repair carries our six-month guarantee on our repairs, and an alarm that won't stop at night is covered by our 24/7 emergency repairs across Gauteng. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Adding an alarm to a fence, or a new fence
An older fence with a basic energiser can often be upgraded to a monitored one with zones, a keypad and an output for the house alarm, without rebuilding the fence. In shops, a Nemtek Druid 25 LCD (2 zone) costs about R6 230 (NeonSales) and a Nemtek Merlin 4i with keypad about R3 750 (Takealot) (Prices checked October 2026). For a new fence, certified electric fence installer builds it with the alarm planned in from the start. 2-year warranty and a compliance certificate on every new electric fence we install. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Questions
Questions about Fence alarms
How does an electric fence alarm work?
The energiser sends a pulse along the wires about once a second and watches what returns; a cut, a short to earth or a drop in voltage changes it, and the energiser sounds the siren and signals the keypad, house alarm or armed response. Read how it works.
How do I reset my electric fence alarm?
Silence it with your code on the keypad or at the energiser, read which zone alarmed, check that zone from a safe distance, clear the cause and re-arm. The exact steps depend on your energiser's manual. See resetting the alarm.
How to silence an electric fence alarm?
Enter your code on the keypad, or disarm the energiser, which stops the siren while you look for the cause. Silencing doesn't fix anything: if the alarm returns when you re-arm, the fault is still on the fence. Read why it goes off.
Can my electric fence call armed response?
Yes, if its alarm output is wired to your house alarm panel as a zone; the alarm's communicator then sends fence alarms to the control room like any other. See linking to your alarm.
Book a technician
Get an electric fence quote
Job card
We WhatsApp or call you back. Fields marked (required) are needed.