CCTV · Morningside
Camera repairs in Morningside, fault by fault
Lines rolling across one camera, a recorder that restarts itself overnight, recordings stamped with last year's date: we repair CCTV systems across Morningside, whoever installed them, and install new ones.
Six-month guarantee on our repairs
Morningside and the areas around it. Every area we cover
Camera repairs, whoever installed the system
We repair Hikvision, HiLook and Dahua systems at Morningside homes, practices and offices, whoever installed them and however long ago. Our CCTV page covers the commonest faults, such as a camera showing "no signal" or a black picture at night. This page is about the rest, which are just as fixable once you know what they point to.

What the fault tells us
| What you see | What it usually means |
|---|---|
| Lines or bands rolling across one camera | A poor connector, a damaged cable, or the camera's cable running alongside power cables |
| A picture that flickers or loses colour at times | A power supply that's failing, or a loose joint in the cable |
| The live picture freezes | A slow or overloaded network, or a recorder working too hard |
| Washed-out, pale colours by day | A camera facing into the sun or a bright wall, or a lens that's dirty or ageing |
| Recordings with the wrong date and time | The recorder's clock has drifted or reset, often after a long power cut |
| A recorder that restarts by itself | Its power supply, overheating in a closed cupboard, or a failing hard drive |
| No picture on the monitor, but the app works | The monitor, its cable or the recorder's screen output |
The hard drive: the heart of the system
Everything a system records lives on the recorder's hard drive, and it works harder than any drive in a home computer, writing day and night without a break. When it fails, recordings stop, often unnoticed until someone needs a clip.
- Listen to the warnings. Recorders can beep and send an alert to your phone when the drive has an error, isn't detected or is full. A beeping recorder is asking for attention, not a reason to unplug the buzzer.
- A drive made for recording. We replace failed drives with ones built for continuous recording, sized for the number of days you want to keep.
- What's lost stays lost. Footage on a dead drive is usually gone.
How a repair visit runs
- We ask what changed, and whether there was a storm, a power cut or building work.
- We test each camera at the recorder, then at the camera, to find which side of the cable the fault is on.
- We check the power supply, connectors and cables, the commonest causes, before blaming a camera.
- We check the recorder: its drive, its clock, its settings and the app's connection.
- We fix it, explain it, and flag anything close to failing.
Repair or replace?
Most faults are worth repairing: a connector, a power supply, a drive or a single camera costs far less than a new system. Replacing makes more sense when the recorder has failed and is long out of production, or when most cameras are too old to identify anyone. Even then, the cable can often be reused. We'll give you both options.
Keeping it working
Two things prevent most of the repairs we do: a UPS that keeps the recorder, the camera power supply and the router running through power cuts and softens the surge when the power comes back, and a yearly check of the cameras, cables, drive and settings.
Repair and installation prices
Typical Gauteng market prices from cost and comparison guides, not ours:
- Fault visit or annual service: R500–R1 500 (CompareSecurity)
- 4 cameras, entry HD, supplied and installed: R6 000–R12 000 (CompareSecurity)
Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Booking a camera technician in Morningside
On the job card, give the system's make if you know it, which cameras are affected, and what you see; a photo of the screen helps. All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. We repair cameras all over Morningside, home to 15,723 people on 6.24 square kilometres at the 2011 census, and in nearby Morningside Manor, Edenburg and Sunset Acres. Same-day repairs are offered when the day allows.
Questions
CCTV repair questions in Morningside
Why are there lines rolling across my CCTV picture?
Usually a poor connector, a damaged cable, or the camera's cable running next to power cables. We trace it from the recorder to the camera. Read about faults.
Why does my CCTV recorder keep beeping?
It's warning you: often a hard drive error, a drive it can't detect, a full drive, or a camera that has lost its picture. Check the alert, then call us. Read about the drive.
Why does my CCTV recorder restart by itself?
Usually its power supply, overheating in a closed cupboard, or a failing hard drive. Give it air, and have the drive and supply checked. Read about faults.
Should I repair my old CCTV system or replace it?
Usually repair; replace when the recorder has failed and is long discontinued, or most cameras are too old to identify anyone. The cable can often be reused. Read more.
Book a technician
Get a CCTV quote in Morningside
Job card
We WhatsApp or call you back. Fields marked (required) are needed.