Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Garage doors · Saxonworld

Garage door repairs in Saxonworld, and motors for older garages

A heavy timber tip-up that has always been opened by hand, a garage ceiling nobody has looked behind in years, a door bolt shot closed out of habit: we repair garage doors across Saxonwold, and we fit motors to garages that were built long before anyone thought of one.

Our promise

Six-month guarantee on our repairs

Our promise

1-year guarantee on every motor kit we supply and install

A roll-up garage door and its side-mounted motor, with the motor, battery back-up, drum, guide rails and bottom rail called out01 Motor02 Battery back-up03 Drum, behind the lintel04 Guide rails05 Bottom rail

A garage built before garage motors

Saxonwold was laid out in 1925, and its older garages were built for the cars, and the doors, of their day. Some still have their first doors, always opened by hand; others have had a newer door fitted somewhere along the way, but never a motor. Either way, a garage door motor asks things of a garage that its builders never planned for: a door that runs freely and balances, a ceiling that can carry a motor and a rail, and enough depth behind the door for both.

None of that rules out a motor. It just means the garage and the door are checked first, so the motor goes onto something that can take it. Centurion's installation manual for its SDO4 garage motor sets out the checks clearly, and we use them on every older garage, whichever motor goes in.

A technician crouching inside a garage, checking the side track of a white sectional door with a torch

Which doors can take a motor

An overhead garage motor pulls a door up and back along the ceiling, so it suits doors that open that way:

  • Sectional doors, made of horizontal panels that roll up and back on tracks into the garage.
  • Tip-up doors, a single panel that swings up and in, its bottom edge tipping outwards as it rises.
  • Roll-up doors, which coil above the opening and use a motor of their own type.

Two older types don't suit one:

  • Side-hinged doors, which open outwards like a pair of gates. An overhead motor can't move them, so automating one usually means replacing it with a sectional or tip-up door.
  • Tip-ups balanced by counterweights rather than springs. Gemini's manual, for one, rules its overhead opener out for them.

If you're not sure what you have, a photo of the door from inside, open and closed, tells us at once.

A tip-up swings out

A tip-up door's bottom edge swings outwards as it rises, so it needs clear space in front of the garage while it moves. A car parked nose-up to the door, a bicycle leant against it or someone standing close can be struck. Where a garage opens close to a path or the driveway gate, beams across the opening and the habit of looking before pressing the remote matter all the more. If the door is due for replacing anyway, a sectional door, which moves up and back inside the opening, needs no space outside at all.

The door comes first

Centurion lists the condition a door must be in before an SDO4 goes on it, and it's a good test for any garage motor:

  • It opens freely, without sticking, scraping or binding anywhere along its travel.
  • It's well balanced. Its springs carry most of its weight, so it's no heavier going up than coming down.
  • It stays put. Left at any point in its travel, it shouldn't move on its own by more than 100 mm.
  • It has room. There's enough clearance between the moving parts to keep fingers and clothing out.
  • Its locks, ropes and securing mechanisms have been removed, because the motor takes over the job of holding the door.

An old timber door adds its own checks: panels that swell in the summer rains and stick, hinges worn loose in the wood, a frame that has dropped. Centurion's warning is plain: an unbalanced or faulty door can cause serious injury, and it must be checked and repaired by a qualified person before a motor is fitted. A motor never fixes a bad door; it only hides the problem until the motor fails too.

Old locks, handles and bolts

Hand-opened doors usually come with a handle and a lock, and often a bolt or two on the inside. Once a motor is fitted, they're a hazard: shoot a bolt across out of habit, and the next press of the remote has the motor straining against a locked door. That's why Centurion asks for every lock, rope and securing device to come off before the motor goes on.

The motor then does the locking. With its drive engaged, it holds the door closed, and many motors add a lock-out that stops the remotes working while you're away. If you'd like extra security on top, we'll fit it in a way that can't fight the motor.

Hanging a motor from an old ceiling

The motor and its drive rail hang from the garage ceiling, and Centurion's first requirement is a ceiling structure strong enough to carry them. On an older garage, that's the part worth looking at most closely:

  • The ceiling itself, whether timber boards, pressed metal or plasterboard, isn't built to carry a motor. The hangers are fixed through it into the structure above: the rafters, beams or trusses.
  • The header bracket, which takes the pull of the door, goes on the front wall above the door, or on the ceiling right beside it, into something solid. On old brick, that means sound brick, not crumbling mortar.
  • The angle of the rail. For a sectional door, it runs parallel to the ceiling. For a tip-up, it's angled so that, with the door fully open, the arm joining the door to the motor sits as close to horizontal as possible.
  • What's already up there. Centurion asks for the installation to stay clear of pipes and cables, and an older garage often has both, added over the years.

The motor also needs a plug point close by. Centurion specifies a properly earthed socket, and adding one is a job for a registered electrician.

Is the garage deep enough?

A motor and its rail run back from the door along the ceiling, and they need the length. On the SDO4:

Centurion SDO4 rail and overall length
DoorDrive railOverall length of the motor and rail
Sectional3,000 mm one-piece rail, lifting doors up to 2,440 mm highAbout 3,293 mm
Tip-up2,000 mm one-piece railAbout 2,173 mm

For a sectional door taller than 2,440 mm, Centurion offers a rail extension kit. Measure back from the inside of the door along the ceiling: if a loft, a storage shelf, a light or a beam sits inside that distance, it's worth knowing before the motor arrives. It's a measurement we take on every quote.

Size and weight

Old doors can be big, and solid timber is heavy. The SDO4 handles doors up to 6.5 m wide, with a maximum area of 12 m² on the T10 and 15 m² on the T12, and lifting capacities of 1,000 N and 1,200 N. A heavy double timber door near those limits may be better served by a lighter new door than by the strongest motor, and we'll tell you honestly which it is.

Why we never turn the safety down

Every garage motor stops and reverses when the door meets something it shouldn't, and how hard it pushes before it reverses is its safety force. On the SDO4, it's set automatically while the open and closed positions are learnt, and it can be adjusted from F1, the most sensitive, to F5, the least. Centurion's warning about the top setting is direct: with the safety offset at maximum, the door is dangerous, and safety beams are recommended.

That's the trap with an old door. A stiff, heavy or badly balanced door can trip the safety and reverse on its own, and the tempting fix is to turn the sensitivity down until it stops. We don't. A door that needs maximum force to move is a door that needs fixing, and turning the safety down to hide that removes the one feature that stops the door on a child, a pet or a car bonnet.

A technician aligning a safety beam on a short post beside a sliding gate

What to expect once it's fitted

A motorised door moves more slowly than you might expect, and that's deliberate. Centurion gives the SDO4's speed as 80 mm a second for a tip-up and 140 mm a second for a sectional door, with fully charged batteries. Its batteries keep it working through a power failure, for 12 to 30 operations depending on the door's size, weight and height, the length of the outage and the batteries' condition.

Garage door repairs in Saxonwold

We repair Centurion, ET, Nice, Gemini and Digidoor motors, and the doors themselves: springs and cables, rollers, tracks and hinges, sticking timber panels, worn tip-up arms, and the beams, remotes and batteries. All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. The fault finder below starts with the checks that are safe to do yourself; springs and cables are for us alone.

Garage door motors at a set price

Once the door and the garage are ready, our kits are installed at a set price with battery back-up and remotes, and carry our 1-year guarantee on every motor kit we supply and install: the ET DC Blue Advanced sectional / tip-up kit at R5 599 for a sectional or tip-up door, and the Centurion RDO Digital roll-up kit at R3 899 for a roll-up door. Door repairs or a new door, where needed, are quoted separately. Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

  • Sectional or tip-up garage kit

    ET DC Blue Advanced sectional / tip-up kit

    R5 599incl. installation

    In the kit

    • DC Blue Advanced
    • 24 V battery back-up
    • 2 × 4-button ET remotes
    Our promise

    1-year guarantee on every motor kit we supply and install

  • Roll-up garage kit

    Centurion RDO Digital roll-up kit

    R3 899incl. installation

    In the kit

    • RDO Digital motor
    • 4-button NOVA remote
    • 24 V battery back-up
    Our promise

    1-year guarantee on every motor kit we supply and install

Prices checked October 2026. Price includes the kit listed, standard installation on a gate or door that already runs freely, and our 1-year kit guarantee. Not included: a power point at the motor if there isn't one (a job for a registered electrician), extra rack, gate or door repairs, and accessories. These are quoted before any work starts.

Booking a garage door technician in Saxonwold

On the job card, tell us the type of door, whether it has ever had a motor, and what's wrong; photos of the door from inside and of the ceiling above it help us plan. Our technicians cover every street of Saxonwold, a suburb of 2,557 residents on 2.58 square kilometres in 2011, and nearby Parkview, Forest Town and Parktown North too. Same-day repairs are offered when the day allows.

Fault finder

What is your garage door doing?

Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.

What's it doing?

Likely causes

Garage door motor · the motor does nothing

Most likely first

  1. No power: the plug is loose, the power point is off, or a fuse has blown.

  2. Not enough power reaching the motor from its battery or power supply (a Centurion SDO4 shows E7, or Lb for a low battery).

Safe checks you can do

When to stop and book

Fuses and the motor's power supply are a technician's job.

Questions

Garage door questions in Saxonwold

Can a motor be fitted to an old side-hinged garage door?

Not an overhead motor: it pulls a door up and back, and side-hinged doors open outwards. Automating one usually means a new sectional or tip-up door. Read about door types.

How deep does a garage need to be for a garage door motor?

On Centurion's SDO4, about 3.3 m along the ceiling for a sectional door and about 2.2 m for a tip-up, measured back from the door. Read about depth.

Should the old locks come off when a garage motor is fitted?

Yes: Centurion asks for all locks, ropes and securing devices to be removed, so the motor never strains against a locked door. The motor then holds the door shut. Read more.

Can the safety sensitivity be turned down so a heavy door closes?

It can, but it shouldn't be: Centurion warns that at maximum the door is dangerous. A door that needs that much force needs repairing. Read about safety force.

Book a technician

Get a garage door quote in Saxonworld

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.