Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Electric fences · Inanda

Electric fence repairs in Inanda, and fences that meet a neighbour's

A boundary wall in Inanda with your fence on one side and the neighbour's on the other, a corner where two fences almost touch, an energiser that has lost its partner and shows a service alarm: we repair and install electric fences across Inanda. 2-year warranty and a compliance certificate on every new electric fence we install.

Our promise

2-year warranty and a compliance certificate on every new electric fence we install

Our promise

Six-month guarantee on our repairs

Inanda

Inanda and the areas around it. Every area we cover

Fences side by side

Inanda is a small suburb, about 0.55 square kilometres with 842 residents at the 2011 census, and its homes sit close together. Boundary walls are shared, and a wall can carry two electric fences: yours on one side, the neighbour's on the other. Elsewhere, two fences meet at a corner, or run a short way apart along a driveway or a gate.

Each fence may be perfectly safe on its own. The question Nemtek's installation manual raises is what happens when someone touches both at once.

A technician on a ladder holding a fence tester against the strands of an electric fence on a boundary wall

Why two fences must pulse together

An energiser sends a short pulse down the fence about once a second, and the limits on how strong that pulse may be are what keep an electric fence from being lethal. Two energisers on two fences each keep their own time. If a person touches both fences, they can receive the two pulses close together, and Nemtek's manual is blunt: the combination can fall outside the legal limits and could give a lethal shock, even when each energiser is compliant alone.

The answer is to make the energisers pulse in step, so that the two pulses are treated as one. Nemtek calls energisers that share their timing a security energiser group, and its manual sets out how they must be built. It adds that synchronisation can matter even for fences that aren't networked together but meet at some point, which is exactly the case on a shared wall.

Type R and type S groups

Nemtek's Druid D25 and D28 can form two kinds of group:

Nemtek security energiser groups, from the Druid D25 and D28 installation manual
Type R groupType S group
Limited byEnergy: no more than 5 J from both togetherCurrent, within the limit for current-limited energisers
PulsesUnder 10 ms each, no more than one a secondNo more than one a second
Nemtek energisers allowedD25 onlyD28 and D25

A type R energiser may be used in a type S group, but not the other way round, and no other makes or models may be mixed into a Nemtek group. Two groups whose fences can be touched at the same time must share the same timing, and an R group and an S group may never be placed where both can be touched together.

Where the shared timing comes from

The pulses are kept in step from one of three sources, according to Nemtek's manual:

  • One energiser leads the others, its sync output setting the timing for the energisers that depend on it.
  • Nemtek's GPS unit, which gives every energiser the same accurate one-second clock, wherever it is.
  • Nemtek's RS-485 card, which carries the timing over a network of energisers.

Which one suits depends on how far apart the energisers are and whether they're on the same property. Where two neighbours' fences meet, a shared clock is what lets both fences stay live along the shared wall.

Who may do it, and a label on the energiser

Nemtek is clear about who may do this work. A security energiser group must be configured, installed and maintained by, or under the responsibility of, someone Nemtek has trained and authorised to work on these systems. After installing or servicing a group, the installer puts a label on every energiser in it, giving their name, contact details and the date of the work.

That label is worth looking for. If the energisers on your wall are meant to be synchronised and there's no label, or the label is years old, it's a good reason to have the group checked. Certified electric fence installer.

Four zones from two energisers

The same Druids can also split one property's fence into more zones, so an alarm says where it came from. Two Druid 2x energisers, linked by three wires (a ground, a data wire and a sync wire), make a four-zone system: one is set as the master and shows as zones 1 and 2 on the keypad, the other as the slave, showing as zones 3 and 4. Because they're joined by the sync wire, they pulse in step too.

Only the master talks to the keypads; it can take up to two keypads, one expansion card and its one slave. The master also has to be told that a slave is there. Once it knows, it raises a service alarm if the slave stops answering, so a fault on half the fence can't go unnoticed. On a large site, up to 32 Druids, 64 zones, can be networked, each with its own address from 1 to 32.

A technician shining a torch on the terminals of an open electric fence energiser box in a garage

Working on a shared wall

Work on a fence that shares a wall with a neighbour's starts with finding out what's there: whose energiser feeds which wires, which make and model each is, and whether they're already synchronised. Where both are Nemtek Druids, a group may be the neatest answer; where they aren't, keeping the fences apart is. Either way, it helps to speak to your neighbour first, because the safest solution often involves both energisers. What we look at on the day:

  • Where the two fences come within reach of each other, along the wall, at corners and at gates.
  • Each energiser's make, model and type, from its label, and whether either already carries an installer's group label.
  • How the two would share a clock, if a group makes sense, and which of the three sources suits them.

Electric fence repairs in Inanda

We repair Nemtek and JVA energisers, keypads, sync and network links, and the fences themselves: broken wires, cracked insulators, loose brackets, earth spikes, gate contacts, sirens and strobes. All our spare parts are genuine, and every repair comes with our six-month guarantee on our repairs. The fault finder below has the safe checks to try first, none of which involve touching the wires.

New fences and certificates

A new fence is planned with you on site, including any fence it meets next door, built to the rules Nemtek and JVA print in their manuals, tested along every zone and handed over with its certificate. If you only need a certificate, see electric fence certificates.

Typical electric fence prices

Market prices in Gauteng, from installer price lists, cost guides and shop listings, not ours:

  • 8-line wall-top fence, installed: R115–R125 a metre (published price lists of Gauteng installers)
  • Nemtek Druid 25 LCD (2 zone), in shops: about R6 230 (NeonSales)
  • Energiser repair: R800–R2 500 (Kandua)
  • Inspection and certificate for a fence that already complies: R850–R1 500 (Kandua, Completo)

Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Booking a fence technician in Inanda

On the job card, give the energiser's make and model, what the display or keypad shows, and whether the fence shares a wall with a neighbour's. We work throughout Inanda, from the streets near St David's Marist, Inanda, to its edges by Wierda Valley and Chislehurston. Same-day repairs are offered when the day allows, and a fence that's down at night is treated as urgent.

Fault finder

What is your fence doing?

Pick what you're seeing for the likely causes, the safe checks you can do yourself, and when to stop and book. Taken from the manufacturers' own manuals.

What's it doing?

Likely causes

Electric fence · the alarm keeps going off

Most likely first

  1. The fence voltage has dropped below the alarm level: something is touching the wires, or plants have grown into the fence.

  2. The gate input is open: the gate isn't fully closed.

  3. The fence condition is poor: dirty or failed insulators, or wet insulators after rain.

Safe checks you can do

When to stop and book

Never touch the fence wires or open the energiser. If the alarm won't clear, we'll find the fault on the fence.

Questions

Electric fence questions in Inanda

Is it dangerous to have two electric fences on one wall?

It can be if someone can touch both: two energisers pulsing on their own timing can together give a lethal shock. Synchronised energisers, or keeping the fences apart, prevent it. Read why.

What is a security energiser group?

Energisers that share their timing so their pulses arrive together, keeping the combined shock within the limit. Nemtek's Druid D25 and D28 form type R and type S groups. Read about groups.

Who may install synchronised electric fence energisers?

Nemtek requires someone it has trained and authorised for this work, who labels each energiser with their name, contact details and the date. Read about the label.

Can two Nemtek energisers make a four-zone fence?

Yes: two Druid 2x energisers set as master and slave, linked by three wires, show as zones 1 to 4 on the keypad. Read about four zones.

Book a technician

Get an electric fence quote in Inanda

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.