Palisade and weld mesh · Johannesburg
Palisade fencing in Johannesburg, ClearVu-type and weld mesh
Palisade along a street front in Parktown, ClearVu-type mesh round a block of flats in Yeoville, weld mesh down the side of a warehouse yard: we supply and install steel fencing across Johannesburg, build the gates to match, and repair fences that have been hit, cut or rusted.
Six-month guarantee on our repairs
Johannesburg and the areas around it. Every area we cover
Steel fencing prices per metre
Here's what steel fencing typically costs. Market prices in Gauteng, supplied and installed, from published cost guides, not ours:
| Fence | Typical price |
|---|---|
| Steel palisade 1.2 m | R900–R1 500 a metre (Kandua) |
| Steel palisade 1.8 m | R1 800–R2 200 a metre (Kandua); R1 980–R2 420 a metre (LocalPros) |
| Steel palisade 2.4 m | R2 000–R3 000 a metre (Kandua) |
| Steel palisade with pillars | R3 100–R3 800 a metre (ProCompare) |
| ClearVu-type high-security mesh | R1 300–R1 600 a metre (ProCompare); R1 200–R1 700 a metre (Completo) |
| Weld mesh | R600–R800 a metre (ProCompare) |
What moves a quote: the height, the finish (galvanised, powder-coated or both), brick pillars, a slope, how many gates, and how easy the site is to work on. On a busy city street, access and working hours count too. Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
ClearVu-type mesh and weld mesh
ClearVu-type high-security mesh is rigid panels of thick wire with openings too small for fingers. It's very hard to climb or cut and stays almost see-through, which suits a block of flats, a school or a business that wants a secure perimeter without looking like a cage. It costs more than palisade per metre, so it can be kept for the street front and entrances.
Weld mesh, a welded wire grid in rolls or panels, is the economical choice for the sides and back of a property, a yard or a long lane. It's lighter and less imposing than palisade, and an electric fence can run along the top of either. More on both is on weld mesh fencing.

Palisade for older houses and street fronts
Plenty of older houses in Parktown, Houghton and Kensington sit behind solid walls, and opening the street front with palisade or ClearVu-type mesh lets passers-by and patrols see in, so nobody can work at the gate unseen. Palisade, pressed steel pales with pointed tops bolted to rails, is the strongest and most obvious of the steel fences and stands up well to a vehicle. It can run between existing brick pillars, keeping the character of the old boundary while opening it up.

Gates built to match
A fence needs gates in the same profile: a driveway gate and a pedestrian gate, made to the opening. A driveway gate that will be automated is built for its motor from the start, with a straight bottom rail for a sliding motor's rack or posts strong enough for swing arms, and the motor, beams and remotes can go in on the same job. A steel pedestrian gate typically costs R2 500–R6 000 (Completo) in the market.
Existing gates get repaired too: a gate that drags, a hinge that has torn loose, a frame bent by a car, or a lock that no longer lines up. For the motor side, see gate motors in Johannesburg.
Flats, offices and industrial sites
Blocks of flats fence the street front and the parking, usually with a vehicle gate and a pedestrian gate that residents open with a remote, a tag or the intercom.
Shops and offices in the inner city often have palisade or a security gate across the frontage and a fenced yard behind.
Warehouses and yards take tall palisade or ClearVu-type mesh on deep posts, wide sliding gates for trucks, and often an electric fence on top, with weld mesh along the less exposed sides to keep the cost down.

Fence repairs
We repair steel fencing where it has failed rather than replacing the whole run: pales and panels cut out by someone getting in, posts and sections hit by vehicles, missing bolts and clamps, and rust at the base where the steel stays wet, treated and repainted. Six-month guarantee on our repairs.
Booking a fencing quote in Johannesburg
On the job card, give the rough length of the boundary, the fence you have in mind, the number of gates and whether they'll be automated. Photos along the line help us quote close to the final figure, and for a business, tell us when work can be done. We work across the city, from Houghton and Melville to Westdene, Yeoville and the southern suburbs. For a damaged fence or gate: Same-day repairs are part of the normal week, whenever the day's bookings allow.
Questions
Fencing questions in Johannesburg
What makes a palisade quote in Johannesburg go up or down?
Height first, then the finish (galvanised, powder-coated or both), brick pillars, the number of gates, any slope, and how easy the site is to work on. On a busy city street, access and permitted working hours count too. See typical prices per metre.
What does ClearVu fencing cost in Johannesburg?
Published guides put ClearVu-type high-security mesh at R1 300–R1 600 a metre; R1 200–R1 700 a metre supplied and installed (prices checked October 2026), more than palisade, which is why it can be kept for the street front alone. Read about ClearVu-type mesh.
Do you build gates to match a palisade fence?
Yes, driveway and pedestrian gates in the same profile, made to the opening, and built ready for a gate motor if they'll be automated. We repair existing gates too. Read about gates.
Can you fence a block of flats in Johannesburg?
Yes: the street front and parking, with vehicle and pedestrian gates, in palisade or ClearVu-type mesh, and weld mesh on the less exposed sides. Read about flats and businesses.
Book a technician
Get a palisade fencing quote in Johannesburg
Job card
We WhatsApp or call you back. Fields marked (required) are needed.