Skip to content

24/7 emergency repairs across Gauteng

081 566 5451

Guides · Gates

Sliding gate vs swing gate: which suits your driveway?

Whether you're building a new entrance or replacing an old gate, the first choice is how it opens: sliding along the wall or swinging on hinges. Neither is better everywhere. The right one depends on how much space you have, which way the driveway slopes, how windy the spot is and how busy the gate will be. Here's how they compare, using the makers' own figures for the motors that drive them.

Our promise

1-year guarantee on every motor kit we supply and install

Our promise

Six-month guarantee on our repairs

A technician adjusting the bracket of a gate arm on a brick pillar beside a double swing gate

The quick comparison

Sliding gate vs swing gate
Sliding gateSwing gate
Space it needsWall space beside the opening, as long as the gateA clear arc behind the opening, as deep as each leaf
Sloping drivewayCopes well, the gate runs level along the streetDifficult if the drive rises inside: leaves scrape the ground
WindBarely affectedA clad leaf catches the wind like a sail
Weight and lengthHandles long, heavy gatesLimited by leaf length, because the motor pushes near the hinge
SpeedSteady, one panelOften quicker to open a gap for a car, two leaves at once
LooksPlain run along the boundarySuits pillared, formal entrances
MotorOne motor on the ground beside the gateOne arm per leaf, on the pillars

When a sliding gate is the better choice

Sliding gates are the norm on Gauteng driveways for good reasons. They don't need any room in front of or behind the opening, so they suit short driveways and properties that open straight onto a parking bay. They run along the street level, so they cope with a driveway that slopes up into the property. And because the gate's weight sits on wheels on a track, the motors can move very heavy gates: ET's Drive 300 is built for 300 kg on a leaf up to 25 m long, and its Drive 1000 for 1,000 kg and up to 40 m of travel.

The trade-off is the track. A sliding gate needs a level, clean track and good wheels, and stones, sand and a sagging gate are the commonest reasons it drags. More on sliding gates.

Gloved hands fitting a steel gear rack along the bottom of a sliding gate, the motor's pinion gear beside it

When a swing gate is the better choice

Swing gates suit entrances with pillars, short boundaries where there's no wall to slide along, and properties where the ground behind the gate is level. A double swing gate can open a car-width gap quickly. There's no track to keep clean.

The limits are leaf length, weight and wind. A swing motor pushes from close to the hinge, so a longer leaf is much harder work: Centurion's figures for its Vantage motor drop from 750 kg on a leaf up to 2.5 m to 310 kg at 4 m, and Centurion wants an electric lock on leaves longer than 3 m. ET's Wingo takes leaves up to 3.5 m and 500 kg. ET also lists cladding and windy sites among the things that shorten a swing motor's life. More on swing gates.

A technician adjusting the bracket of a gate arm on a brick pillar beside a double swing gate

Should a swing gate open in or out?

For a driveway gate, inwards, into the property, is the usual choice, and for good reasons:

  • the leaves never swing into the street, the pavement, people walking past or a car waiting to come in;
  • the hinges and motor arms are on your side of the gate, out of reach;
  • a gate that swings in can't be levered off its hinges from outside.

Swinging out is sometimes the only option, for example when the ground rises steeply just inside the gate. Then the leaves must clear the pavement and stay within your boundary, and the motor and hinges need extra protection. Double leaves that overlap are set to start a moment apart; ET's Wingo has a delayed start for exactly that. Garden and side gates are a different matter: what matters there is that the gate doesn't open into a path people use.

Busy gates and complexes

For a complex or business entrance, think about how often the gate runs. ET's Drive 1000, on its standard 220 V kit, can run at a duty cycle of up to 98% by ET's figures, so it can keep cycling at a busy entrance, and many estates add a boom for the residents' lane. Swing motors have their own limits: ET gives the Wingo up to 720 cycles a day, at no more than 30 an hour. A very busy entrance is usually a sliding gate or a boom. See estates and complexes.

Sliding gate vs swing gate: the cost

The gate itself costs about the same either way for the same width and material; the difference is the automation. Typical figures in the market:

  • Sliding gate motor: R5 000–R10 000 (ProCompare)
  • Swing gate motor: R7 500–R13 000 (ProCompare)
  • Installation labour, sliding gate motor: R1 500–R3 000 (Kandua)
  • Installation labour, swing gate motor: R2 500–R4 500 (Kandua)

A double swing gate needs two motor arms, which is why swing automation usually costs more. A sliding gate needs a track and rack, which an existing gate may already have. These are the market's figures, not ours. Prices checked October 2026. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Getting the right one

We look at the opening, the slope, the space either side and behind, the wind exposure and how busy the gate will be, then quote for the gate and the motor that suit it. Free quote: no call-out fee when we do the work. If no work is done, a R650 call-out fee applies. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.

Questions

Questions about sliding and swing gates

Should gates swing in or out?

Driveway gates usually swing inwards, into the property, so they never open into the street, the pavement or a waiting car, and their hinges stay on your side. Outward swing is for sites where the ground rises steeply inside. Read more.

Should a fence gate swing in or out?

A garden or side gate should open away from paths people use, which usually means into your property; if it opens towards a pool or a slope, think about where a child would end up. Read more.

Is a sliding gate cheaper than a swing gate?

Usually, once automated: a sliding gate needs one motor, while a double swing gate needs two arms, and swing motor labour costs more in the market. The gate itself costs about the same. See the cost.

Which is better on a sloping driveway?

A sliding gate, because it runs level along the street; a swing gate on a driveway that rises inside will scrape the ground as it opens. See the comparison.

Book a technician

Get a gate motor quote

Job card

We WhatsApp or call you back. Fields marked (required) are needed.

Property type
When
Photos (optional, up to 4)

No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.