Guides · CCTV
CCTV not recording: why the cameras show live but save nothing
The cruellest CCTV fault is the one you can't see: the cameras show a perfect live picture, and the recorder hasn't saved anything for weeks. It's usually discovered the morning after a break-in. The good news is that it's easy to check for, and usually straightforward to fix. Here's why recorders stop recording, how to check yours in two minutes, and what to do about it.
Six-month guarantee on our repairs

Check it now: the two-minute playback test
Live view proves the cameras work. Only playback proves the recorder is saving:
- Open playback on the recorder's screen or in the app.
- Choose yesterday, and a camera that sees something that moves.
- Look for the timeline bar: recorded periods are usually shown in colour.
- Play a few minutes from yesterday, and a few from last week.
If the timeline is empty, or stops on a particular date, the recorder isn't recording, or stopped on that date. Do the same for each camera: some recorders record some cameras and not others. It's worth doing this once a month as a habit.

1. The hard drive
The drive is the most common reason a recorder stops recording:
- There's no drive, because it was never fitted, or it failed and the recorder no longer sees it.
- The drive isn't formatted in the recorder, so it can't write to it. A new drive has to be set up in the recorder before it records.
- The drive is failing, after years of running continuously, often sped up by heat in a closed cupboard and by sudden power cuts.
- The drive is full and the recorder isn't set to overwrite the oldest footage, so it simply stops.
Most recorders warn about drive problems with an icon, a beep or an app notification. A recorder that's been beeping is often telling you exactly this.
2. The recording settings
- A schedule that leaves gaps: recording set only for certain hours or days.
- Motion-only recording on a camera that doesn't see much motion, or with its detection area or sensitivity set too low, so nothing triggers it.
- A camera that was never added to the recording schedule after it was installed or replaced.
- A wrong date and time, so footage is saved but filed under the wrong day, which makes it look missing.
These are settings, not faults, and they're quick to correct once someone looks.
3. Power cuts and surges
A recorder that loses power mid-write can corrupt its drive, and one that restarts after every power cut may come back with errors. If the cameras and recorder have no backup power, they record nothing during load shedding, which is exactly when many break-ins happen. A small UPS on the recorder and the camera power supply keeps them running and protects the drive. A recorder that died after a storm may have been damaged by a surge along the camera or network cables.
HiLook, Hikvision and Dahua
The reasons are the same across brands. HiLook recorders are Hikvision's budget range and work the same way: Hik-Connect sends notifications about drive and recording problems if they're set up. Dahua's recorders report the same kinds of storage exceptions. Whatever the badge, the playback test above is the one that matters. More on the brands: Hikvision and Dahua.
Single cameras with their own memory card or cloud
Not every camera records to a recorder. Many home cameras, including Wi-Fi cameras and doorbell cameras, save to a memory card inside the camera or to the maker's online storage. When one of those stops recording, the usual reasons are different:
- The memory card is full, worn out or has failed, or was never formatted in the camera.
- The online storage plan has lapsed, so live view still works but nothing is kept.
- The camera has dropped off the Wi-Fi, so it can't upload, or it reconnects so often that it misses events.
- Motion detection is set too low, or its zones don't cover where people walk.
The same playback test applies: open the camera's history and look for yesterday.
If footage is missing after an incident
If you need footage and find a gap, don't restart or reset the recorder, and don't remove the drive: anything that's on it is easiest to recover as it is. Note the exact times you need, check every camera's playback for those times (one camera may have caught it even if another didn't), and export what you find to a memory stick or your phone straight away. Then have the cause found, so it doesn't happen twice. If a recorder or drive may hold evidence, tell us before we work on it, so we copy what's there first.
Keeping it recording
- Run the playback test monthly, on more than one camera.
- Give the recorder air and backup power: a cool, ventilated spot and a UPS through load shedding protect the drive.
- Turn on the warnings, so a drive problem reaches your phone instead of sitting silently on the recorder.
- Have it serviced yearly: cleaning cameras, testing the drive and checking the schedule catch problems before the day you need the footage.
How it's fixed, and what it costs
We check the drive's health and replace it if it's failing, set it up in the recorder, check every camera is in the recording schedule, set the overwrite and the clock, and confirm with playback before we leave. Where load shedding is the problem, we add backup power. Typical figures in the market:
- 1 TB surveillance drive: about R920–R1 900 (Takealot) in shops
- 2 TB surveillance drive: about R2 900 (Takealot) in shops
- Fault visit or annual service: R500–R1 500 (CompareSecurity)
These are the market's figures, not ours. Prices checked October 2026. All our spare parts are genuine, and every repair carries our six-month guarantee on our repairs. Your exact price is set in a free quote before any work starts. No call-out fee when we do the work. If no work is done, a R650 call-out fee applies.
Questions
Questions about CCTV not recording
Why is my CCTV camera not recording?
Most often the hard drive: missing, unformatted, failing or full without overwrite. Otherwise a schedule or motion setting leaves that camera out, or the clock is wrong so footage looks missing. Run the playback test to see. Check it now.
Why is my HiLook not recording?
The same reasons as any recorder: a drive problem, a recording schedule or motion setting that misses that camera, or power cuts without backup. HiLook works like Hikvision, and Hik-Connect can notify you about drive errors. See the brands.
Can a beeping hard drive be fixed?
Rarely worth it: a drive that's beeping or reported as failing in a recorder is usually replaced, and any footage you need should be copied off first if it can still be read. See the hard drive.
Book a technician
Get a CCTV quote
Job card
We WhatsApp or call you back. Fields marked (required) are needed.